2019-050 -Adopting Local CEQA Guidelines

Home Browse Search

Local Guidelines for Implementing the California Environmental Quality Act (2019) ENVIRONMENTAL IMPACT REPORT If analysis of the project's energy use reveals that the project may result in significant environmental effects due to wasteful, inefficient, or unnecessary use of energy, or wasteful use of energy resources, the EIR shall mitigate that energy use. This analysis should include the project's energy use for all project phases and components, including transportation-related energy, during construction and operation. In addition to building code compliance, other relevant considerations may include, among others, the project's size, location, orientation, equipment use and any renewable energy features that could be incorporated into the project. This analysis is subject to the rule of reason and shall focus on energy use that is caused by the project. This analysis may be included in related analyses of air quality, greenhouse gas emissions, transportation or utilities in the discretion of the Lead Agency. The EIR must describe all significant impacts, including those that can be mitigated but not reduced to a level of insignificance. Where there are impacts that cannot be alleviated without imposing an alternative design, their implications and the reasons why the project is being proposed, notwithstanding their effect, should be described. The EIR must also discuss any significant irreversible environmental changes that would be caused by the project. For example, use of nonrenewable resources during the initial and continued phases of a project may be irreversible if a large commitment of such resources makes removal or nonuse thereafter unlikely. Additionally, irreversible commitment of resources may include a discussion of how the project preempts future energy development or future energy conservation. The discussion of irreversible commitment of resources may include a discussion of how the project preempts future energy development or future energy conservation. Irretrievable commitments of resources to the proposed project should be evaluated to assure that such current consumption is justified. 7.20 E NVIRONMENTAL S ETTING An EIR must include a description of the physical environmental conditions in the vicinity of the project. This environmental setting will normally constitute the baseline physical conditions by which the Lead Agency determines whether an impact is significant. The description of the environmental setting shall be no longer than is necessary to provide an understanding of the significant effects of the proposed project and its alternatives. The purpose of this requirement is to give the public and decision makers the most accurate and understandable picture practically possible of the project's likely near-term and long-term impacts. (1) Generally, the Lead Agency should describe physical environmental conditions as they exist at the time the Notice of Preparation is published, or if no Notice of Preparation is published, at the time environmental analysis is commenced, from both a local and regional perspective. Where existing conditions change or fluctuate over time, and where necessary to provide the most accurate picture practically possible of the project's impacts, the Lead Agency may define existing conditions by referencing historic conditions, or conditions expected when the project becomes operational, or both, that are supported with substantial evidence. In addition, the Lead Agency may also use baselines consisting of both existing conditions and projected future conditions that are supported by reliable projections based on substantial evidence in the record. 2019 City of Santa Ana Local Guidelines 7-14 ©Best Best & Krieger LLP