Laserfiche WebLink
BOB Doc. 319076, 326955, 315675 Att, Contract No. 9.3275 <br />(Formerly Contract No. L2167) <br />APPENDIX <br />Guidelines for Standard Licensee Improvements <br />The following criteria are provided to aid in developing a conceptual plot plan to be submitted to <br />Southern California Edison Company herein after referred to as "Licensor" for consideration and <br />approval prior to the start of any construction on "Licensor" p—MMA. <br />Plans should be developed indicating the size and location of all planned improvements. The plan should <br />specify the dimensions of PA planned improvements and the distance of all planned improvements from <br />property lines and all adjacent "Licensor" towers, poles, guy wires or other "Licensor" facilities, <br />The plan must show the locations of all "Licensor" towers and poles, 16-foot, wide access roads, main <br />water lines and water shut -oft" valves, electrical service lines and parldng areas. All plans must indicate <br />adjacent streets and include a "north arrow" and the Licensee's name. <br />SI ADE STRUCTURES <br />fDeffnitiom A non;ftammable fume covered an the top udth a materlat designed to provide shade to aid in <br />growing plants) <br />1. Shade structures must maintain minimum spacing of 50 feet betvieeh shade structure locations, <br />should be placed perpendicular to Licensor's overhead electrical conductors (wires) unless otherwise <br />approved in writing by Licensor, and should not exceed maximum dimensions of: <br />a. 100 feet in length <br />b. 50 feet In width <br />c. 15 feet in height <br />2. Shade structures will not be permitted within the following areas reserved for Licensor's access: <br />a, Within 2 feet from edge of 16-foot wide access roads <br />b. 50-foot radius around suspension tower legs, H-Frames and poles <br />c. 100-foot radius around dead-end tower legs, H-Frames and poles <br />d. 25-foot radius around anchors/guy wires, poles and wood poles <br />3. Shade structures must utilize the following design: <br />a. Tomporary/slip joint construction only <br />b. Non-flammable frame only <br />c. Adequately grounded by a licensed electrical engineer <br />d. Shade covering must be non-f[ammable and manufactured with non -hydrocarbon materials. <br />-I. <br />2014,12,01 V1r-CW-R,p <br />initial <br />Licensor/Licensee <br />