HCI SYSTEMS, INC - Laserfiche WebLink

Home Browse Search

��. t EXHIBIT A ATTACHMENT 1 SCOPE WORK' 1. GENERAL SCOPE OF WORK The Contractor shall furnish all supervision, labor, equipment, materials and supplies to furnish and install a replacement/upgrade to the fire alarm system control panel at the Santa Ana Jail facility. Contractor shall remove eight (8) existing Edwards IRC-3 addressable Network panel(s), components and install new EST3 panel(s), connect to the existing FireWorks System at the Police Department Building and install at the Jail Facility Control Center a FireWorks System Touch Screen for Monitoring, while maintaining RAI operation at all time prior to switching over to maintain an operable system at all times. The existing Edwards IRC-3 panels that will be removed will be turned over to City staff. Existing sequence of operations will be maintained along with system labeling. All existing field devices to remain as -is. The following work shall be performed and completed: • Furnish and Install eight (8) IRC-3 panels located in the following communication rooms: o Basement o I5° Floor 0 2"a Floor 0 3m East + West 0 4m East + West 0 5"' Floor Maintenance Area • Contractor is responsible for any rental equipment required to access detectors. • Furnish and install new control panels. • Provide technician labor to perform programming of the new devices and new EST3 Panel(s). • Provide technician labor to perform System Commissioning along with one (1) Re test and one (1) final acceptance testing with AHJ (Authority Having Jurisdiction). • Contractor to include a three (3) Year Warranty on the New EST3 Panel(s) and components. The warranty will begin upon final acceptance from the City. • Onsite training of the FireWorks System, • Plans and permits shall be included and are the responsibility of the contractor. Contractor shall produce engineered shop drawings, bill of materials and provide submittal packages for plan check to the AHJ and Project Manager, Gabricla P. Lomeli. All drawings to be produced in PDF format with as-builts. 2. BIDDER MINIMUM QUALIFICATIONS 1) Bidder must be an Edwards EST Authorized Distributor. 2) Bidders must have, at the time of bid submittal and for the duration of the contract, a valid, current B (General Building) OR C7 (Low Voltage Systems) OR C10 (Electrical) license issued by the California Contractors License Board (CSLB), for the type of work performed. 3) Bidders shall also ensure that any subcontractors also possess, at the time of bid submittal and for the duration of the contract, at least one of the licenses listed above, for the work they will perform for this contract.