06 16 20 PWA_02_02 Exh2 - IS-MND

Home Browse Search

L S A FAIRVIEw BRIDGE REPLACEMENT AND STREET IMPROVEMENTS (9TH STREET TO 16TH STREET) PROJECT CITY OF SANTA ANA, CALIFORNIA Table A.1: Mitigation Monitoring and Reporting Program MITIGATION MONITORING AND REPORTING PROGRAM MAY 2020 Mitigation Measures Responsible Party Timing for Mitigation Measure Completion Date 402 (Nuisance). • Environmentally sensitive areas will be established near sensitive air receptors. Within these areas, construction activities involving the extended idling of diesel equipment or vehicles will be prohibited to the extent feasible [as required by CCR Title 13, Section 2485(c)]. • Track -out reduction measures will be used, such as gravel pads at Project access points to minimize dust and mud deposits on roads affected by construction traffic, in accordance with the State Vehicle Code Section 23114, with special attention to Sections 23114(b)(F), (e)(2), and (e)(4). • All transported loads of soils and wet materials will be covered before transport, or adequate freeboard (space from the top of the material to the top of the truck) will be provided to minimize emission of dust during transportation in compliance with the SCAQMD Rule 403. • Dust and mud that are deposited on paved, public roads due to construction activity and traffic will be promptly and regularly removed to reduce PM emissions [State Vehicle Code Section 23114, with special attention to Sections 23114(b)(F), (e)(2), and (e)(4)]. • To the extent feasible, construction traffic will be scheduled and routed to reduce congestion and related air quality impacts caused by idling vehicles along local roads during peak travel times (consistent with the traffic control plan approved by the City of Santa Ana Traffic Engineer). • Mulch will be installed or vegetation planted as soon as practical after grading to reduce windblown PM in the area. Be aware that certain methods of mulch placement, such as straw blowing, may themselves cause dust and visible emission issues and may require controls such as dampened straw [Caltrans Standard Specifications for Construction, Sections 18.1-02C (Dust Control Binders) and 18- 1.03 (Construction — Dust Palliatives) or Greenbook (2018 or most current) equivalent]. • During demolition, clearing, grading, earthmoving, or excavation operations, excessive fugitive dust emissions will be controlled by regular watering or other dust preventive measures using the following procedures, as specified in the South Coast Air Quality Management District (SCAQMD) Rule 403. All material excavated or graded will be sufficiently watered to prevent excessive amounts of dust. Watering will occur at least twice daily with complete coverage, preferably in the late morning and after work is done for the day. All material transported on site or off site shall be either sufficiently watered or securely covered to prevent excessive amounts of dust. The area disturbed by clearing, grading, earthmoving, or excavation operations will be minimized to prevent excessive amounts of dust. These control techniques will be indicated in Project specifications. Visible dust beyond the property line emanating from the Project will be prevented to the maximum extent feasible. • Project construction plans will show the duration of construction. Ozone precursor emissions from construction equipment vehicles will be controlled by maintaining equipment engines in good condition and in proper tune per manufacturers' specifications. • All trucks that are to haul excavated or graded material on site will comply with State Vehicle Code Section 23114, with special attention to Sections 23114(b)(F), (e)(2), and (e)(4), as amended, regarding 4 R:\WKE1702\ISMND\Final ISMND\Appendix D Fairview St Bridge MMRP.docx (05/26/20)