Laserfiche WebLink
generated to be signed off establishing the data mapping and functionality of the program. <br />• FlexNet ID <br />• Meter Manufacture (Sensus) <br />• Meter ID <br />• Device Status (Active, Inactive, On, Off) <br />• Address <br />• Account I D <br />• Account Status (Active, A, On, Inactive, 1, Off) <br />• Account Service Type (Residential, Commercial, etc.) <br />• Billing Cycle <br />• Route I D <br />• Service Size (0.625, 0.75, 1, 1.5, 2, 3, 4, 6, 8, 10, 12) <br />• Name <br />The Utility will be required to establish the SFTP of the file generated from the CIS to the location of <br />where the front end AMI software can access the data. <br />5.3. Smart Meter provisioning <br />5.3.1. New smart Meters, being brought into enQuesta Inventory will be required to contain the <br />AMI flag on the Meter Inventory record within enQuesta. This AMI Fla- is required to be set to a <br />Y and the AMI type field identified as 0= Manual Meter Nvhich refers to non AMI smart <br />meter and is the default meaning someone physically required to turn off or on the meter onsite. <br />I — AMI Manual which means the meter is a smart AMI meter and can obtaining interval <br />data but does not have remote connect or disconnect capability from the front end AMI <br />solution. 2 AMI RDM Remote Disconnect Meter which means the service can be shut off <br />or reduced remotely by front end AMI solution. The field is also required to be set. The <br />25H-1 12 Page 105 <br />