Agenda Packet_2022-01-18 - Laserfiche WebLink

Home Browse Search

a. Gas Metal Arc Welding (GMAW/MIG); Gas Tungsten Arc Welding (GTAW/TIG); Arc Welding in joining pipe sections; Flux Core Arc Welding (FCAW); Shielded Metal Arc Welding (SMAW/Stick); all types of metalizing, fusion welding, structural welding, pressure welding, and braze/soldering (including flat, overhead and pipe welding) b. Field installation and repair of metal pipe (2"-48" diameter and up to 6'-30' in depth) including welding on high pressure pipe c. Field installation and repair of welded handrails, ladders, pipes, and cages on above ground water storage tanks (up to 172' in height), buildings, and subterranean vaults d. Field installation and repair of welded metal pipes and associated fittings at water pumping station facilities (must be able to meet individual demand due to varying pipe materials throughout the City) e. Sandblasting, cleaning, priming, and painting finished or repaired items The Contractor shall be responsible for pick-up and removal of equipment and waste, and refuse shall be disposed of sufficiently and in frequent intervals so that at no time there is unsightly accumulation of debris and/or rubbish. Final cleanup shall include the removal of all equipment, surplus material, debris, and rubbish. 2. FABRICATION SERVICES The Contractor shall also provide fabrication services including but not limited to fabricating customized fittings and structural components associated with City owned facilities. The Contractor shall have a wide-range of knowledge and experience fabricating with aluminum, steel, and copper. The Contractor shall be capable of fabricating custom parts including but not limited to ladders, stair stringers and threads, catwalks, gates and handrails. 3. MISCELLANOUS AND VALUE ADDED SERVICES The Contractor shall provide other miscellaneous welding, fabricating, and field services and shall propose additional related services. These assignments could include working in confined spaces and any supplementary welding or fabrication work not covered by the services listed herein. The Contractor may propose additional related services that the City has not specifically identified in this RFP to accomplish the stated goals of this RFP. Value added related services will be considered by the City and may or may not be incorporated in the agreement. All parts and materials must be supplied new and factory approved. D. EMERGENCY ON-CALL SERVICES The Contractor shall also provide emergency on-call welding services. Emergency on-call services are applicable seven days a week, weekends, and holidays. In the event of a catastrophic pipeline/structural failure or malfunction, the Contractor should be readily available outside of work hours to respond to emergency calls within twelve (12) hours. Furthermore, the Contractor shall provide emergency on-call repair services within twenty-four(24) hours of receiving the call. The Contractor is responsible for staying on site until all components are re-energized. E. PROJECT MANAGEMENT & COORDINATION City Council City of Santa Ana P2241_208 � 1/18/2022 On-Call Welding Services Page 13 of 38