Laserfiche WebLink
SCE Doc. 319004 Aft. <br />APPENDIX <br />Guidelines for Standard Licensee Imnrovements <br />Contract No. 9.5074 <br />The following criteria are provided to aid in developing a conceptual plot plan to be submitted to <br />Southern California Edison Company herein after referred to as "Licensor" for consideration and <br />approval prior to the start of anti construction on "Licensor" propertu. <br />Plans should be developed indicating the size and location of all planned improvements. The plan should <br />specify the dimensions of all planned improvements and the distance of all planned improvements from <br />property lines and all adjacent "Licensor" towers, poles, guy wires or other "Licensor" facilities. <br />The plan must show the locations of all "Licensor" towers and poles, 16-foot wide access roads, main <br />water lines and water shut-off valves, electrical service lines and parking areas. All plans must indicate <br />adjacent streets and include a "north arrow" and the Licensee's name. <br />SHADE STRUCTURES <br />(Definition: A non-flammable frame covered on the top with a material designed to provide shade to aid in <br />growing plants) <br />1. Shade structures must maintain minimum spacing of 50 feet between shade structure locations, <br />should be placed perpendicular to Licensor's overhead electrical conductors (wires) unless otherwise <br />approved in writing by Licensor, and should not exceed maximum dimensions of: <br />a. 100 feet in length <br />b. 50 feet in width <br />c. 15 feet in height <br />2. Shade structures will not be permitted within the following areas reserved for Licensor's access: <br />a. Within 2 feet from edge of 16-foot wide access roads <br />b. 50-foot radius around suspension tower legs, H-Frames and poles <br />c. 100-Foot radius around dead-end tower legs, H-Frames and poles <br />d. 25-foot radius around anchors/guy wires, poles and wood poles <br />3. Shade structures must utilize the following design: <br />a. Temporary/slip joint construction only <br />b. Non-flammable frame only <br />c. Adequately grounded by a licensed electrical engineer <br />d. Shade covering must be non-flammable and manufactured with non -hydrocarbon materials. <br />Initial <br />Licensor/Lice s <br />2014.12.01 V11-GS-JC <br />