Laserfiche WebLink
CITY OF SANTA ANA <br />Materials for vinyl -coated chain -link fence shall be as specified herein. Material shall be of the <br />same color of vinyl coating. Privacy slates to be provided and manufactured from 97 percent recycled <br />plastic. Gates to be schedule 40 galvanized steel with fork type latches or fabricated lock upon City's <br />request and three 180-degree hinges per leaf. Doorking 9000 or approved ASTM compliant equal to <br />be utilized as the gate actuator upon request. Painted finishes are not acceptable, and color for this <br />job is the manufacturers standard bloack, brown, or approved upon request. <br />Vinyl -coated chain -link fences and gates shall be constructed of the following materials: <br />ITEM <br />MATERIAL <br />SPECIFICATION <br />Posts and <br />Section 804.01A of CALTRANS <br />Braces <br />Fabric <br />Section 80-4.01 B of CALTRANS <br />Accessories <br />Section 80-4.01 C of CALTRANS <br />Gates <br />Section 80-4.01 D of CALTRANS <br />Line Posts <br />SCH 40 galvanized steel <br />2.375-inch (59 mm) outside diameter, Schedule 40 <br />galvanized steel pipe or galvanized "H" columns <br />weighing <br />not less than 2.7 lb./ft. 13.18 kg /m2. <br />Corner and <br />SCH 40 galvanized <br />2.875-inch (73 mm) outside diameter, Schedule 40 <br />Terminal Posts <br />steel <br />galvanized steel pipe <br />Gate Posts <br />Galvanized Steel <br />3.500-inch (89 mm) diameter for man gates and 6.625- <br />Pipe <br />inch <br />168 mm for vehicular ates <br />Diameter for <br />Galvanized Steel <br />Gateposts to be galvanized steel pipe <br />Vehicular Gates <br />ITEM <br />MATERIAL <br />SPECIFICATION <br />Top, Bottom, <br />Galvanized Steel <br />1.660-inch (42.16 mm) outside diameter, plain end, <br />and Brace Rail <br />sleeve <br />cou led alvanized steel pipe <br />Gate Frame <br />SCH 40 galvanized <br />1.9-inch (48.26 mm) outside diameter Schedule 40 <br />steel <br />galvanized steel pipe for fittings and truss rod <br />fabrication <br />Automated <br />Galvanized Steel <br />Rolling Gate and Gate Actuator including concrete track <br />Gate/Gate <br />with a stainless steel v-track inset and flushed to <br />Actuator <br />concrete pad. <br />Doorking 9000 —1 HP Actuator with Doorking 8054 <br />Microplus RF receiver compliant approved equal <br />recommended for the gate actuator. <br />Wi-Fi capable and keypad entry to be provided upon <br />request. <br />Fire Access Box <br />Knox Box or equivalent equal to be installed with <br />actuated <br />ate ent ke ad. <br />Gate <br />Chrome Wheels, SS Gate <br />4"-6" Chrome wheels to be utilized on inset wrought <br />Track/Wheels <br />Track <br />iron or SS type 216 V-track flushed and inset within <br />concrete base Or cantilever set up with rubber wheels <br />to be utilized upon <br />request <br />ON -CALL INSTALLATION, MAINTENANCE AND REPAIR FOR FENCING AND GATES 22 <br />