NS-1025 - Laserfiche WebLink

Home Browse Search

Ge Where a business has a main entrance on more than one elevation of the building, such secondary frontage may contain a wall sign of the same limitations as prescribed for the primary frontage. Where a business has a secondary frontage, but does not have a main entrance to the secondary frontage, such frontage may contain a wall sign not to exceed twenty (20) percent of the surface of the building facade to which it is applied, or 1 1/2 square feet per lineal foot of business frontage, whichever is greater. Building Facade Facing Copy area shall not exceed forty (40) percent of the buildi~ facade facing to which it is applied. In no case shall the copy area exceed thirty (30) percent of the building facade. Under Marquee Siqn One for each business entrance located on the property. Directional Siqn As needed to guide or direct pedestrian or vehicular traffic. Roof or Pole Signs One (1) roof and/or pole sign a maximum background area of two hundred fifty (250) square feet, or two (2) square feet per lineal foot of street frontage, whichever is the lesser; provided, however, that no illuminated roof or pole sign shall be permitted within seventy-five (75) feet of the property zoned for residential purposes. In computing area of sign background, only that face or those faces which can be seen from any one direction at one time shall be counted. No roof or pole sign shall be located closer than three hundred (300) feet from any other roof or pole sign on the same parcel of real property. Roof and pole signs may be allowed as follows: a. One (1) sign for each integrated development as defined in Section 41-619.2 of this Code. b. One (1) sign for each separately owned or leased parcel if the development is not integrated as defined herein. The owner of any lot or parcel of real property fronting on more than one street or highway may elect to combine the total street frontage of said property in establishing the maximum permitted size of any roof or pole sign. However, in the event all street or highway frontage is so combined, only one such sign shall be permitted to be constructed on the premises and such single roof sign based on such combined street or highway shall not exceed in area the maximum permitted by the provisions of this Section. Animated Signs. Signs may be animated if they conform to the standards as set forth in General Provisions, Section 41-619.3 of this Code. Revolving Signs Revolving signs may not exceed 8 RPM. -8-