HARBOR SQUARE PARTNERS - Laserfiche WebLink

Home Browse Search

approved in writing). The tenant shall verify his sign location and size with owner prior to fabrication. 10.• All shop tenants are required to have an individual letter sign per the accompanying design criteria. 11, Address numbers shall be applied to each store by the tenant's sign company during regular course of construction. 12. Special signs which vary from this sign criteria must first be approved by the owner and respective city authority. 13. The maximum allocated sign area for the aggregate of all permanent signs (except exempt and convenience signs) shall be as noted herein. 14. NOTE: No sign shall be constructed until approved building ..permits from City Planning and Building and Safety Departments are received. 15, All work -shall be of excellent quality. Owner reserves the right to reject any work determined to be of lesser quality by owner or the architect. C. GENERAL SIGN SPECIFICATIONS 1. No exposed raceway, crossovers, conduits, conductors, transformers, etc., shall be permitted. 2. All lettering shall be restricted to the "net sign area". See accompanying design criteria for specific information• 3. No projections above or below the "net sign area" will be permitted (except as otherwise approved in writing). 4. All signs and their installation must comply with all local building and electrical codes and bear a U.L., label placed in an'inconspicuous location. Local sign ordinances should be consulted for requirements not covered in these criteria. 5. For purposes of store identification, tenant will be permitted to place upon each entrance to it's demised premises not more than 144 square inches of gold leaf lettering not to exceed 2 inches in height, indicating hours of business, emergency telephone, etc. The number and letter type face shall be subject to owner's approval. Any other window graphics shall be approved by owner and city. Individual - letter sign specifications: 6. Typical internally illuminated, (a) Shop signs shall be attached in designated areas on fascia and may not exceed 70% of the leasehold width. (b) The face of the individual letters 6 logos shall be constructed of acrylic plastic (3/16" thick min.) and fastened to the cliannelized metal can in an approved manner.. All surrounds or trim in a single sign shall be a single color. Sign contractor shall provide neces- sary fastening & bracing to securely install sign (for wind loads, Cetc.), all fasteners exposed to weather shall be galvanized. Y 2. r