R&M ELECTRICAL CONTRACTING (RMF CONTRACTING, INC.)

Home Browse Search

CITY OF SANTA ANA c) Foundations, Poles, and Luminaires: i. Mark and confirm pole locations per the aiming diagram provided. If there are any issues, immediately notify your Project Manager. ii. Provide labor, materials, and equipment to install (7) LSS foundations as specified on Layout and per the stamped foundation drawings. iii. Remove spoils from site and deposited at City yard. iv. Provide labor, materials, and equipment to assemble (32) Musco TLC -LED or equivalent luminaires, electrical component enclosures, poles, and pole harnesses. V. Provide labor, materials, and equipment to assemble (7) Cree OSQ area - light luminaires. vi. Provide labor, equipment, and materials to erect (7) dressed LSS Poles and aim utilizing the pole alignment beam. d) Electrical: i. Provide labor, materials, and equipment to install new breakers as needed in existing panel MP (240v/1 Ph). ii. Provide labor, materials, and equipment to intercept City -installed conduits from panel MP in the grass area and install all underground conduit, wiring, pull boxes etc. and terminate wiring as required for the sports lighting and area lighting. iii. Provide as -built drawings on completion of installation. e) Control System: i. Provide NEMA 3R painted steel cabinet to house new lighting controls. Provide labor, equipment, and materials to install new 3R cabinet on extended concrete pad adjacent to panel MP. Panel MP and extended pad provided by City. ii. Provide labor, equipment, and materials to install control and monitoring cabinet(s) and terminate all necessary wiring. iii. Provide a dedicated 120 V 20 A controls circuit or a step-down transformer for 120 V control circuit if not available. iv. Check all zones to make sure they work in both auto and manual mode. V. Commission Control -Link® by contacting Control -Link CentralTm at 877-347- 3319.