R&M ELECTRICAL CONTRACTING (RMF CONTRACTING, INC.)

Home Browse Search

CITY OF SANTA ANA V. Contact the facility owner/manager to confirm the existing private underground utilities and irrigation systems have been located and are clearly marked to avoid damage from construction equipment. Notify owner and repair damage to marked utilities. Notify owner and Contractor regarding damage which occurred to unmarked utilities. vi. Provide labor, equipment, and materials to off load equipment at jobsite per scheduled delivery. vii. Provide storage containers for material, (including electrical components enclosures), as needed. viii. Provide necessary waste disposal and daily cleanup. ix. Provide adequate security to protect the jobsite, and delivered products from theft, vandalism, or damage during the installation. X. Keep all heavy equipment off playing fields when possible, provide ground protection as needed to minimize damage to existing grounds. Repair damage to grounds which exceeds that which would be expected. Indentations caused by heavy equipment traveling over dry ground would be an example of expected damage. Ruts and sod damage caused by equipment traveling over wet grounds would be an example of damage requiring repair. xi. Provide startup and aiming as required to provide complete and operating sports lighting system. A. Installation to commence upon delivery and proceed without interruption until complete. Notify Contractor immediately of any breaks in schedule or delays. xiii. Shall sod trenches to match existing conditions. b) Foundations, Poles, and Luminaires: i. Mark and confirm pole locations per the aiming diagram provided. If there are any issues, immediately notify your Project Manager. ii. Provide labor, materials, and equipment to install (3) LSS foundations as specified on Layout and per the stamped foundation drawings. iii. Remove spoils from site and deposited at City yard. iv. Provide labor, materials, and equipment to assemble (9) Musco TLC -LED or equivalent luminaires, electrical component enclosures, poles, and pole harnesses. V. Provide labor, materials, and equipment to assemble (3) Cree OSQ area - light luminaires. vi. Provide labor, equipment, and materials to erect (3) dressed LSS Poles and aim utilizing the pole alignment beam. c) Electrical: i. Provide labor, materials, and equipment to install new breakers as needed in existing panel located in adjacent park building. ii. Provide labor, materials, and equipment to install all underground conduit, wiring, pull boxes etc. and terminate wiring as required for the sports lighting and area lighting. iii. Provide as -built drawings on completion of installation. d) Control System: i. Provide labor, equipment, and materials to install control and monitoring cabinet(s) and terminate all necessary wiring. ii. Provide a dedicated 120 V 20 A controls circuit or a step-down transformer for 120 V control circuit if not available.