Laserfiche WebLink
CITY OF SANTA ANA <br /> SPECIFICATIONS <br /> PROJECT NO.: 25-6030 <br /> TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br /> 4.10 AVENUE <br /> 4.10 TYPE 334 HUB/COMMUNICATION CABINET ASSEMBLY <br /> If called for in the plans, the Type 334 Hub/Communication cabinet shall meet the <br /> following: <br /> 1. Assembly shall meet the requirements of the Caltrans Transportation Electrical <br /> Equipment Specifications (TEES) dated March 12, 2009. The Cabinet Assembly <br /> shall consist of but not limited to the following: <br /> a. Housing#1 —Clear Anodized <br /> b. Mounting Cage#1 <br /> c. Fan and thermostat assembly <br /> d. Service Panel#1 <br /> e. Service Panel Assembly <br /> f. All other associated wiring, hardware and foundation bolts. <br /> 2. In addition to the Caltrans TEES requirements,the following shall be provided: <br /> a. Cabinet Lights <br /> Each cabinet shall be equipped with two(2)fluorescent lighting mounted inside <br /> the top front and rear portion of the cabinet. A door actuated switch shall be <br /> installed to turn the cabinet lights on when either the front or rear door is <br /> opened. The door switches shall be on a separate circuit by itself;and used only <br /> to turn on the cabinet light. <br /> b. Pullout Drawer/Cabinet Print Holder Assembly <br /> A pullout drawer shall be installed in the cabinet cage. The drawer shall be 17" <br /> long by 12" long wide by 1 ' in. deep. It shall have a hinged top that covers <br /> the storage box area and also provides a smooth surface to write on. <br /> c. Other Electronic Components: <br /> A Switched Rack Power Distribution Unit mounted on the Cabinet cage. This <br /> network manageable device shall allow programmable control of eight power <br /> outlets. Model shall be an APC Model AP7900. <br /> 4.11 TRAFFIC SIGNAL CONTROLLER <br /> If called for on the plans, the controller shall meet the following: <br /> Traffic signal controllers shall be an Econolite Cobalt RackMount controller complying <br /> with the latest Caltran's TEES requirements for operation within a 332 cabinet. Controller <br /> 61 <br />