JOHNSON CONTROL INC. 1 -2003 - Laserfiche WebLink

Home Browse Search

H/2t%2003 FRI 12:04 FAX 562 799 9443 JCI OPERATIONS CYPRESS 0131013 Schedule 213 - METrASYS- AHU, UNT, and DX Application Specific Controllers On a Scheduled Basis DX Application Speck Controller Verify that DX is being controlled at the appropriate values. Change one set point value; verify smooth transition and, stable control at the new set point. Return set point to original value. Repeat for each additional control loop, if any. Verify that controlled valves and dampers will stroke fully in both directions, seating tightly where appropriate. Verify the proper operation of critical control processes and points associated with this unit. Make adjustments if necessary. UNITARY Equipment Application Specific Controller Verify that ASC is In control at the desired value(s). Change one set point value; verify smooth transition and stable control at the new set point. Return set point to original value. Repeat for each additional control loop, if any. Additional Tasks and/or Special Instructions: Form E9762 (Rev 10 /00) Verify that controlled valves and dampers will stroke fully in both directions, sealing tightly where appropriate. Verify the proper operation of critical control processes and points associated with this unit. Make adjustments if necessary. AHU Application Speciific Controller Verify that AHU is being controlled at the appropriate values. Change one set point value; verify smooth transition and stable control at the new set point. Return set point to original value. Repeat for each additional control loop, .if any. Verify that controlled valves and dampers will stroke fully in both directions. seating tightly where appropriate. Verify the proper operation of critical control processes and points associated with this unit. Make adjustments if necessary. As Required Verify /calibrate other points associated with these units where the need for possible "Corrective Maintenance" is indicated.