Laserfiche WebLink
5. All wiring ased in the fire alarm system shall be listed and approved by <br /> California State Fire Marshal. <br /> <br />2.04 <br /> <br /> A. <br /> <br />Connectors: <br /> <br />o <br /> <br />Splices for Conductors No. 10 and Smaller: Made with 3-M "Scotch-Lock" or <br />Ideal "Wing-Nut" insulated, solderless, screw-on cormectors. <br />Connectors for Conductors No. 8 and Larger: Of compression, National <br />Electric, Blackburn, or Burndy mechanical connectors. Fill connector voids with <br />electrical insulation putty and follow with 3-M Scotch tape #33, minimum 2 <br />layers. <br />All splices and terminations of high voltage cable made in strict accordance with <br />manufacturer's recommendations and using kits specifically designed for this <br />purpose. <br /> <br />WIRING DEVICES <br /> <br />Wiring devices furnished by Arrow Hart, Bryant, Hubbell, General Electric, Leviton, <br />Pass and Se3qnour or Slater. Special purpose devices by manufacturers specified. <br />Catalog numbers are Pass and Seymour except where otherwise noted. <br /> <br />All wiring devices specification grade, except where otherwise noted. <br /> <br />For additional wiring devices refer to notes on Drawings. <br /> <br />Switches: <br /> <br />Single Pole Toggle: Single throw switch, AC quiet type 20 amp, 120-277 volt, <br />No. 521-1. <br /> <br />2. Three-way Toggle Switch: AC quiet type, 20 amp, 120-277 volt, No. 523-I. <br /> <br />Receptacles: <br /> <br />Receptacles shall be of NEMA standard, equal to Pass and Seymour No. 26262- <br />HGW. <br />Receptacles used in hazardous area shall be explosion proof type. <br />Isolated ground receptacles shall be orange colored, equal to Pass and Seymour <br /> <br />Wiring devices shall be color "white", cover plates shall be stainless steel in restrooms, <br />laboratories, food service areas, locker rooms and utility spaces and otherwise shall be <br />color "white". <br /> <br />Basic Materials and Methods 16050-6 <br /> <br /> <br />