Laserfiche WebLink
2.07 <br /> <br />Disconnects installed indoors to have NEMA 1 enclosure. Disconnects installed <br />outdoors or in wet locations to have raintight NEMA 3R enclosures. Fuse sizes shall <br />be per equipment supplier recommendations. <br /> <br />EQUIPMENT FURNIStlED BY OTHERS <br /> <br />This Contractor as a part of the work covered by this section, shall furnish and install <br />all rough-ins for the connection of equipment listed below. Further, he shall furnish <br />and install all materials required, make final connections to same. This equipment <br />includes, but is not necessarily limited to, the following: <br /> <br />Plumbing equipment - refer to Division 15. <br />HVAC Equipment - refer to Division 15. <br /> <br />2.08 <br /> <br /> A, <br /> <br />ELECTRICAL LIGIITING FIXTURES <br /> <br />Work covered includes manufacturing, equipping, wiring, and assembling of all <br />lighting fixtures. Provide lighting fixtures complete for each and every light outlet in <br />the type, quality, and size of fixture indicated on the drawings. <br /> <br />B. The lighting fixtures are specified on the drawings. <br /> <br />Include a lighting fixture on every light outlet shown, unless otherwise indicated to be <br />omitted. If the type of lighting fixture is not specifically noted, provide without extra <br />cost to the Owner, a lighting fixture of the same type called for under a similar <br />condition elsewhere on the Contract Drawings. <br /> <br />Catalog No. on the lighting plan is for the purpose of indicating the general type, <br />quality, and size of fixtures that will be required. The use of Catalog Nos. for a <br />lighting fixture does not necessarily include all accessories that may be required for a <br />complete and operational installation. <br /> <br />All luminaires and other lighting equipment delivered to the job complete, wired and <br />including all supporting means, such as plaster frames, supports, hangers, canopies, <br />sockets, holds, all current or voltage modifiers, such as ballasts, starters, all light <br />control materials; specifically diffusers, louvers, lenses, reflectors and refractors. <br /> <br />All lighting fixtures constructed and installed in accordance with local building codes <br />and directives by the NFPA and shall bear the label of approval of the UL. All <br />materials new and of best grade of approved manufacturing standards. Workmanship <br /> <br />Basic Materials and Methods 16050~8 <br /> <br /> <br />