Laserfiche WebLink
APP!,IEB CAR OPERATING PANEL (NEW)-( VANDAL RESISTANCE ) <br /> <br />An applied vandal resistance car operating panel shall be fin'rdshed. The panel shall contain <br />a bank of mechs_nical illuminated buttons marked to correspond with the landings served, <br />and emergency call button, emergency stop button, door open and door close buttons, and a <br />light switch. The emergency call button shall be connected to a bell that serves as an <br />emergency signal. ^ ikn switch, if optional fan is provided, shall also be located in the car <br />operating panel. <br /> <br />SECOND CAR OPERATING PANEL {NEW]-{ VANDAL RESISTANCE ) <br /> <br />A second vandal resistance car operating panel shall be furnished. The panel shall contain a <br />bank of mechanical illuminated buttons ,marked to correspond to the landings served, <br />emergency call button, emergency stop button, door open and door close buttons. <br /> <br />TELEPHONE (NEW] <br /> <br />A telephone shall be mounted in the car operating panel. Necessary wires shall be included <br />in the car traveling cable. Commurfication equipment a~d connections to the building <br />service system shall be furnished and installed by the o~er. The telephone cabinet may be <br />provided with (without) an optional certificate frame. <br /> <br />CAR POSITION INDICATOR ~NEW] <br /> <br />A car position indicator shall be installed. The position of the car in the hoistway shall be <br />shown by illumination of the indication corresponding to the landing at which the car is <br />stopped or passing. <br /> <br />AUDIBLE SIGNAL (INDICATES PASSING OR STOPPING AT A LANDING) <br /> <br />An audible signal shall sound in the car to tell passengers that the car is either stopping or <br />passing a landing served by the elevator. <br /> <br />EMF, RGENCY CAR LIGHTING (NEW) <br /> <br />An emergency power unit employing a 6 volt sealed recbargeable battery and totally static <br />circuit shall be provided. The power unit shall illuminate the elevator car and provide <br />current to the alarm bell in the event of normal power failure. The equipment shall comply <br />with the requirements of the latest revision oftbe ASME / ANSI Al7.1 Cede. <br /> <br />P~e5 <br /> <br /> <br />