Laserfiche WebLink
24SEVEN Version 2.6 CAD Services — Overview <br />CompuDyne Proprietary <br />2.3 FIELDS AND SPECIAL CONSIDERATIONS <br />Most of the fields in our schemas are very standard, with type definitions in the XSD. All date times we <br />handle of valid SQL (Sequel) date times, and the other fields are standard. We expect particular values in <br />a few fields: <br />• Incident Number <br />• Incident Type <br />• FDID <br />• Location Type <br />• Agency ID <br />• Apparatus ID <br />• Apparatus Clear Time / Cancelled in Route <br />• Address Fields <br />• Sequences <br />• Using Address Parsing <br />2.3.1 INCIDENT NUMBER <br />Incident Numbers are restricted to seven digits by the NFIRS 5 standard. The 24SEVEN will accept <br />more digits through the CAD interface, but it will take the seven right most characters sent from CAD. <br />An example of this would be, if CAD were to send incident number 04- 0233432, the 24SEVEN CAD <br />interface would only take the 0233423, and disregard the rest. <br />• 2.3.2 INCIDENT TYPE <br />Incident Types are unique for different CAD partners and Customers, therefore we allow for Incident <br />Type Matching for different installations. We match a string from the CAD partner, with an NFIRS <br />(National Fire Information Recording System) Incident Type. The CAD Services Administrator allows <br />you to setup the Incident Type Matching for the CAD Feed. The string inserted in the CAD Services <br />Administrator and the string sent in the Incident Type Element from CAD must be exact matches. <br />2.3.3 FDID <br />FDID is the fire station identifier that must be reported to NFIRS. CAD is NOT required to send this, you <br />can send any identifier, and the RMS will translate it into the correct FDID, if the 24SEVEN software is <br />setup properly. If CAD does not send this, then the 24SEVEN software can be used to populate this as <br />well, for a single agency database. CAD should send this for a multiple agency database. <br />2.3.4 LOCATION TYPE <br />24Seven CAD feed handles seven types of "Location Types" as defined from NFIRS. <br />They are listed in Appendix C, as well as here. NFIRS accepts the integer value only, (I — 7). <br />Acceptable Values in Message Incidents: <br />Location Type Codes <br />I — Street Address <br />2 — Intersection <br />3 — In Front Of <br />4 —Rear Of <br />f 5— Adjacent to <br />6— Directions <br />7 — National Grid <br />CompaDyne Proprietary <br />CompuDyne December 28, 2005 Page 4 <br />