Laserfiche WebLink
<br />.., <br /> <br />..., <br /> <br />IFB 99-107 <br />page 16 of 33 <br /> <br />14. GENERAL CLEANUP <br /> <br />Remove litter. Sweep or vacuum soil from floors. Spot clean unsightly soil from <br />building, fixture and surfaces. Spot mop floors to remove liquids and unsightly soil. <br />Empty trash and ash receptacles which may become filled prior to the scheduled routine <br />cleaning. Refill dispensers that may become depleted prior to the next scheduled routing <br />cleaning. Remove carpet stains.' <br /> <br />15. REARRANGE FURNITURE <br /> <br />All furniture moved by the Contractor during the performance of the services shall be <br />returned to its appropriate location. All items such as chairs, trash receptacles, etc., shall <br />be returned to their appropriate location. <br /> <br />16. REFILL-DISPENSERS <br /> <br />Check and refill each toilet paper dispenser, hand soap dispenser, paper towel dispensers, <br />toilet seat cover dispenser, etc. The supplies shall be placed in the dispensers in <br />accordance with the directions of the supply and dispenser manufacturers. Hand soap <br />dispensers and adjacent surfaces shall be wiped to remove spillage. <br /> <br />17. REMOVE CARPET. CHAIR UPHOLSTERY & PANEL/WALL FABRIC STAINS <br /> <br />.t a. <br /> <br />" <br /> <br /> <br />Prespray the spot with a water based solvent (pH8.5 to 9.5), and allow 10 minutes <br />dwell time. Agitate soiled area with a soft-bristled nylon brush and extract <br />residue with warm water. <br /> <br />18. REPLACE TRASH RECEPTACLE LINERS <br /> <br />All obviously soiled or torn trash receptacle liners shall be replaced with a new trash <br />receptacle liner. The liner shall be replaced in such a manner as to present a neat uniform <br />appearance. <br /> <br />19. RE-WAX VINYLrrILE FLOORS <br /> <br />If there are black marks, marks from chair glides, imbedded soil in the finish, remove <br />before re-waxing. One uniform thin coat of approved floor finish will be applied. A one <br />tile border, next to the walls will not be re-coated. After the finish has dried, the <br />appearance will be uniform with no visible stress, swirls, etc. Remove all stripping or <br />