Laserfiche WebLink
RESOLUTION 2006 <br />REVENUE FY 06-07 <br />ACCOUNT DEPARTMENT/MISCELLANEOUS FEE OR SERVICE UNIT FEES <br />SECTION X PLANNING & BUILDING AGENCY <br />5911 1) Inspections outside of normal business hour <br /> (4 hour minimum chazge for Holidays, Saturday or <br /> Sunday Inspections) Per Hour 71.00 <br />5911 2) Re-inspection fee assessed under applicable provisions <br /> of the Building Code Per Hour 71.00 <br />591 ] 3) Inspections for which no fee is specifically <br /> indicated (minimum charge -one (I) hour) Per Hour 71.00 <br />5401 4) Additional plan review required by changes, additions, <br /> or revisions to approved plans (minimum charge -one (1) hr.) Per Hour 71.00 <br />5913 ELECTRICAL CODE <br />Any person desiring a permit required by the Electrical Code Each Permit 34.00 <br />shall, at the time of filing an application , pay a fee of $4.50 <br />towards the State Mandated Training Program and pay a fee <br />equal to $29.50 plus the sum of the fees for the work to be <br />done under the permit as set forth in the following schedule. <br />There is no minimum fee for the issuance of a permit for <br />single family residences and duplexes. The minimum total <br />fee for issuance of a permit for all other uses shall be $55.25 55.25 <br />Note: An Electrical Code permit <br />fee is separate from and additional <br />to the fee for any other permit which <br />may be required by code provisions <br />other than the Electrical Code. <br />FEE SCHEDULE <br />5913 1) For new construction and relocation on residential <br />single family and duplexes: <br />Six cents ($.O6) per square foot per floor plus $28.40 per <br />service meter shall only include receptacle, switch and <br />lighting outlets. All other fees shall apply. Per SF 28.40 <br />Six cents ($.06) per squaze foot for detached or attached garages or <br />carports shall only include receptacle, switch and lighting outlets. <br />All other fees shall apply. <br />5913 2) Receptacles, outlets, light fixtures and general use switches, Each 0.88 <br />each <br />50 <br />75A-66 <br />