|
EXHIBIT 2
<br />CUSTOMER: CRY OF SANTA ANA. CA
<br />SOURCEW ELL MEMBER ACCOUNT NO. 1988
<br />PROJECT: SEWER DEPARTMENT 11FT UTILITY BODY
<br />QUOTATION
<br />NO. 12556R
<br />DATE: 1/21/2025
<br />TERMS: NET30
<br />F.O.B: CUSTOMER
<br />CITY
<br />PART NO.
<br />DESCRIPTION
<br />PRICE
<br />EXTENSION
<br />PB LOADER CONTRACT NO. 080521-PBL
<br />SOURCEWELL CONTRACT MARKET PRICES
<br />MARKET PRICE UTILITIY TRUCK
<br />1
<br />UTILITY TRUCK COMPLETE WITH:
<br />$224,266.00
<br />CHASSIS:
<br />2025 F-600 CHASSIS 4X2 SO REGULAR CAB 169" WB DRW XL (F6K) WITH 7.3L V-8 DEVCT 335HP GAS ENGINE, TORCISHIFT 10-SPEED AUTOMATIC TRANSMISSION W/PTO PROVISION,
<br />22,000 LB. GVWR PAYLOAD PACKAGE, 40-GALLON FUEL TANK, 19.5" ARGENT PAINTED STEEL WHEELS, RUNNING BOARDS, CAMERA PREP KIT, TRAILER BRAKE CONTROLLER, BACK-
<br />UP ALARM, FULL SIZE SPARE TIRE & WHEEL, TWO (2) EXTRA KEYS, MEDIUM DARK SLATE INTERIOR W/ HEAVY DUN VINYL 40/20/40 SPLIT BENCH SEAT AND EXTERIOR PAINTED
<br />OXFORD WHITE
<br />UTILITY BODY:
<br />FETE MODEL 69550S UTILITY BODY APPROX. 11 FT LONG X 60" HIGH SIDE PACKS, SIDE PACK COMPARTMENTS ARE 21"DEEP, CONSTRUCTED FROM 10 GA. GALVANNEAL SHEET
<br />STEEL, INNER WALL AND TOPS ARE 12 GA TREAD PLATE, DOORS ARE 10 GA. GALVANNEAL, CARGO AREA IS 5W WIDE WITH THE FLOOR CONSTRUCTED FROM 1/8" TREAD PLATE, 6
<br />FLUSH MOUNT 3/8" CHAIN TIE DOWNS, CONCEALED DOOR HINGES, OUTTER BODY IS SMOOTH WITH NO BENDS OUTWARD OR EXTERNAL HINGES TO MAKE A SMOOTH SIDED BODY
<br />FOR EASY CLEANING, INSTALLATION OF DECALS OR BODY WRAPS, INTERIOR OF COMPARTMENTS ARE SPRAYED WITH A DURABLE MATERIAL WITH A RUBBERIZED FEELING, GAS
<br />SHOCK SOFT -STOP DOOR OPENERS, DOORS HAVE WHALE TAIL KEYED ALIKE LATCHES, GANG LOCK DOOR SYSTEM PROVIDES A 3-POINT LOCKING SYSTEM AND LOCKS ALL DOORS
<br />ON EACH SIDE (EXCEPT FOR WORKBENCH DOOR) WITH ONE LEVER ON EACH SIDEPACK, THIS 3-POINT LOCKING SYSTEM ADDS EXTRA PROTECTION AGAINST THEFT, 10" DROP IN
<br />TAILGATE AT REAR OF BODY, LED LIGHTING STRIPS IN ALL MAIN BODY COMPARTMENTS, RUBBER CROWN TYPE FENDERS, FULL LENGTH RAIN GUTTERS, AUTOMOTIVE TYPE
<br />WEATHER STRIPPING, MUD FLAPS, DOT APPROVED LIGHTING (LED), BACKUP ALARM, NON PRESURIZED CABINETS, LED STRIP LIGHTS MOUNTED ON ALL COMPARTMENT DOORS
<br />AND BODY FULLY UNDERCOATED.
<br />WORK BENCH:
<br />24- WORK BENCH, REAR ENTRY WITH ONE CABLE STEP ON SS, 1/4' THICK TOP PLATE, CLASS 5 RECIEVER HITCH WITH 2' REDUCER SLEEVE, 7 POLE TRAILER RECEPTICAL TO BE
<br />TBD BY CITY OF SANTA ANA ALONG WITH WIRING DIAGRAM. NO SIDE ACCESS DOORS. TOP SURFACE WILL HAVE 2 STRIPS OF NON -SLIP SAFTY TAPE EACH BEING 6" WIDE THE FULL
<br />WIDTH OF THE WORKBENCH. A 90# JACKHAMMER HOLDER WILL BE INSET INTO THE DRIVERSIDE REAR OF THE WORKBENCH (OR CURBSIDE IF CUSTOMER PREFERS). A 3/4" X 50'
<br />AIR REEL, ELECTRIC OPERATED COX P/N 1125-5-50 WILL BE MOUNTED UNDERNEATH THE 1/4" TOP PLATE OF THE WORK BENCH TOWARD THE CS WITH THE HOSE COMING OUT OF
<br />THE REAR OF THE WORKBENCH. A WILTON 8' 1780 SWIVEL VISE WILL BE MOUNTED TO THE TOP OF THE WORKBENCH ON THE CS AND WILL BE ON A SLIDE, (APPROX 12') SO VISE
<br />CAN BE EXTENDED PAST THE CS SIDEPACK SO CUSTOMER CAN USE IT ON THE CS.
<br />TAMPER HOLDER: ONE TAMPER HOLDER MOUNTED ON TOP OF THE WORKBENCH AT THE REAR OF THE DS SIDE PACK NEXT TO THE CARGO AREA.
<br />BEDLINER: BEDLINER APPLIED TO CARGO FLOOR, DRIVER & CURBSIDE SIDEPACK WALLS.
<br />NOTE: TOPS OF SIDEPACKS WILL NOT BE BEDLINED BUT WILL BE PAINTED TO MATCH PIPE RACKS.
<br />BULKHEAD: FRONT BULKHEAD CONSTRUCTED FROM 7 GA. STEEL, STARTING FROM FLOOR TO TOP OF SIDE PACKS.
<br />E-TRACK & ACCESSORIES:
<br />E-TRACK INSTALLED ALONG DRIVER AND PASSENGER SIDE COMPARMENTS, 1 ROW W ABOVE BED AND THE SECOND ROW 6" FROM THE TOP OF SIDE PACK.
<br />SIXTEEN (16) E-TRACK ATTACHMENTS WITH A 2' ID PIPE TO HOLD 8 SHOVELS, ONE ATTACHMENT REQUIRED FOR TOP ROW AND ONE ATTACHMENT REQUIRED FOR BOTTOM ROW
<br />TO HOLD EACH SHOVEL, THESE SHOVEL ATTACHMENTS CAN BE PLACED AT ANY POINT ALONG THE E-TRACK
<br />TEN (10) E-TRACK ATTACHMENTS OF ASSORTED CONFIGUATIONS
<br />EIGHT (8) E-TRACK RATCHET STRAPS.
<br />COX P/N TSH-N-550 MOUNTED TRANSVERSE ON FRONT OF FRONT BUMPER WITH HOSE PROJECTING OUT TOWARD C/S WITH GATE VALVE
<br />DRIVER SIDE COMPARTMENT ACCESSORIES:
<br />1ST COMPARTMENT APPROX. 265/8" WIDE WITH FIVE ADJUSTABLE SHELVES
<br />2ND COMPARTMENT APPROX. 34-7/8' WIDE WITH FIVE ADJUSTABLE SHELVES
<br />3RD WHEEL WELL COMPARTMENT APPROX 43-314" WIDE WITH THREE ADJUSTABLE SHELVES.
<br />4TH REAR COMPARTMENT APPROX. 26-5/8" WIDE WITH PARTS STORAGE CABINET APPROXIMATELY 20' WIDE WITH 9 DRAWERS, EACH HAVING A 250# DRAWER RATING, TOP TO
<br />BOTTOM, TOP OF CABINET IS A SHELF, DRAWERS #1-2 ARE 3" HIGH AND HAVE DIVIDERS APPROXIMATELY EVERY 2', DRAWERS #3-6 ARE 4' HIGH AND HAVE NO DIVIDERS,
<br />DRAWERS #7-9 ARE 6" HIGH AND HAVE NO DIVIDERS.
<br />NOTE: DRAWER INSIDE HEIGHT IS 1" LESS THEN DRAWER HEIGHT. ALSO, ONE ADJUSTABLE SHELF ABOVE CABINET
<br />CURB ISEE COMPARTMENT ACCESSORIES:
<br />1ST COMPARTMENT APPROX. 26-5/8" WIDE WITH THREE TO FOUR ADJUSTABLE SHELVES DEPENDING ON HOW MUCH ROOM THE CONTROL PANELS NEED. THE CONTROL PANELS
<br />FORT E VANAIR D80 AIR COMPRESSOR AND THE KUBOTA GENERATOR WILL BE MOUNTED TOWARD THE TOP OF THE COMPARTMENT
<br />2ND COMPARTMENT APPROX. 34-7/8' WIDE WITH FOUR TO FIVE ADJUSTABLE SHELVES. INVERTOR WILL BE LOCATED ON TOP SHELF AND BATTERY STORAGE FOR BATTERY
<br />OPERATED POWER TOOLS WILL BE ON TOP SHELF.
<br />3RD WHEEL WELL COMPARTMENT APPROX. 43-3/4" WIDE WITH THREE ADJUSTABLE SHELVES
<br />4TH REAR COMPARTMENT APPROX. 26-5/8" WIDE WITH PARTS STORAGE CABINET APPROXIMATELY 20" WIDE WITH 9 DRAWERS, EACH HAVING A 2509 DRAWER RATING, TOP TO
<br />BOTTOM, TOP OF CABINET IS A SHELF, DRAWERS 01-2 ARE 3" HIGH AND HAVE DIVIDERS APPROXIMATELY EVERY 2-, DRAWERS #3-6 ARE 4' HIGH AND HAVE NO DIVIDERS,
<br />DRAWERS 97-9 ARE 6" HIGH AND HAVE NO DIVIDERS.
<br />NOTE: DRAWER INSIDE HEIGHT IS 1" LESS THEN DRAWER HEIGHT. ALSO ONE ADJUSTABLE SHELF ABOVE CABINET
<br />WILTON VISE:
<br />WILTON TRADESMAN SWIVEL VISE MODEL 1780-8' WIL-63202, MOUNTED ON A SLIDE THAT IS MOUNTED ON THE CURBSIDE OF THE WORKBENCH. THE SLIDE WILL ALLOW THE VISE
<br />TO BE EXTENDED PAST THE CS END OF THE WORKBENCH BY APPROX. 12 INCHES.
<br />INVERTER & OUTLET:
<br />3000-WATT INVERTER MOUNTED IN CURBSIDE 2ND COMPARTMENT ON TOP SHELF
<br />ONE (1) FOUR FLEX OUTLET OR POWER STRIP MOUNTED IN THE CURBSIDE 2ND COMPARTMENT POWERED BY THE INVERTER
<br />GENERATOR & OUTLETS:
<br />KUBOTA LOWBOY II DIESEL GENERATOR-GL7000, 7KW STANDBY,6.5KW PRIME, SINGLE-PHASE, 120/240 VOLT, LIQUID COOLED WITH REMOTE START. REMOTE START PANEL WILL BE
<br />MOUNTED IN C/S 1ST CABINET TOWARD TOP. GENERATOR WILL BE LOCATED ON CS SIDEPACK TOWARD FRONT SO AS NOT TO INTERFER WITH PIONEER LIGHT. GENERATOR MAY
<br />OVERHANG OUTSIDE OF BODY BY 2-3"
<br />ONE (1) FOUR FLEX OUTLET MOUNTED AT THE REAR OF THE CS SIDE PACK POWERED BY THE GENERATOR
<br />ONE (1) DUPLEX FLEX OUTLET MOUNTED AT THE FRONT OF THE CS SIDE PACK OR UNDER THE CS SIDE PACK TOWARD THE FRONT POWERED BY THE GENERATOR.
<br />AIR COMPRESSOR & REELS:
<br />VANAIR D80 AIR COMPRESSOR, MODEL 050850-002, 80CFM @ 10OPSI MOUNTED ON THE FLOOR TOWARD THE FRONT OF THE SERVICE BODY BETWEEN THE SIDEPACKS, REMOTE
<br />PANEL TO CONTROL AIR COMPRESSOR WILL BE MOUNTED IN THE CURBSIDE 1ST COMPARTMENT, TOWARD THE TOP.
<br />ONE (1) 314" X 50' AIR REEL, ELECTRIC OPERATED COX P/N 1125-5-50 WILL BE MOUNTED UNDERNEATH THE 1/4" TOP PLATE OF THE WORKBENCH TOWARD THE CS WITH THE HOSE
<br />COMING OUT OF THE REAR OF THE WORKBENCH WITH GATE VALVE
<br />ONE (1) 314" X 50 FT AIR REEL SPRING RETRACTABLE COX P/N TSH-N-550 MOUNTED TRANSVERSE ON FRONT OF FRONT BUMPER WITH HOSE PROJECTING OUT TOWARD C/S WITH
<br />GATE VALVE
<br />WARNING & WORK LIGHTS'.
<br />ONE (1) NATIONAL SIGNAL LOW PROFILE ELECTRIC TILTING 24" X 48" ARROW BOARD MOUNTED OVER CHASSES CAB DIRECTLY IN FRONT OF BODY.
<br />ONE (1) WHELEN PIONEER SERIES MODEL PCH1P1 FLOODLIGHT WITH MODEL 86930PB4 57" TELESCOPING POLE MOUNTED ON FRONT OF CS SIDEPACK IN FRONT OF GENERATOR.
<br />SIX (6) WHELEN AMBER STROBE LIGHTS. WHELEN PM WLN-5VA02ZAR VERTICAL STROBES MOUNTED 2) ON THE GRILL, 2) MID BODY & 2) ON REAR OF BODY ON EACH SIDE PACK
<br />TOWARD THE TOP.
<br />ONE (1) RIGID INDUSTRIES Q-SERIES DIFFUSED FLOODLIGHT, PM 245513, MOUNTED ON HEADACHE RACK POINTING INTO CARGO AREA.
<br />ONE (1) RIGID INDUSTRIES Q-SERIES DIFFUSED FLOOD LIGHT, P/N 245513, MOUNTED IN FRONT OF BODY UNDER PIPE RACK ON DRIVERSIDE POINTING OUTWARD
<br />CONE HOLDERS:
<br />TWO (2) CONE HOLDERS IN FRONT OF THE CHASSIS CLOSE TO THE AIR REELS
<br />CURBSIDE STORAGE BASKET:
<br />STORAGE BASKET WILL BE WELDED OR BOLTED ONTO TOP OF CS SIDE PACK. BASKET WILL START APPROX. 6.8" BEHIND GENERATOR AND EXTEND TO THE REAR OF THE SIDE
<br />PACK. BASKET WILL BE CONSTRUCTED USING FLATTENED EXPANDED METEL ON THE SIDES. STRUCTURAL ANGLE IRON AND/OR STRUCTURAL TUBING WILL BEAT THE TOP OF
<br />THE BASKET FOR REINFORCEMENT. THE FRONT OF THE BASKET WILL BE APPROX. 24" TALL TO PROTECT GENERATOR AND WILL BE MADE OF SHEET STEEL. THE REAR OF BASKET
<br />WILL ALSO BE SHEET STEEL. BASKET WILL BE APPROX. 12 INCHES TALL. BASKET WILL BE PAINTED SAME COLOR AS BODY.
<br />CURBSIDE STORAGE BASKET:
<br />STORAGE BASKET WILL CONSIST OF A BOTTOM SECTION BUILT SIMILAR TO THE BASKET ON THE CURBSIDE. IT WILL ALSO BE 12 INCHES TALL AND HAVE SHEET STEEL WELDED
<br />ENDS. THE BOTTOM SECTION WILL BET E FULL LENGTH OF THE DRIVERSIDE SIDE PACK. THE TOP SECTION WILL BE APPROX 19-20 FEET LONG AND EXTEND OVER THE CAB OF
<br />THE CHASSIS WITH 6-INCH EARS EXTENDING UPWARD ON BOTH SIDES APPROX. EVERY 4-5 FEET. THE FRONT WILL HAVE A SHEET STEEL BANG BOARD WELDED SO AS TO KEEP
<br />PIPE FROM SHIFTING FORWARD, THE REAR WILL BE OPEN. THERE WILL BE
<br />TWO (2) MODEL "RACK -STRAP" MODEL RSi RACHET STRAPS MOUNTED TO THE TOP RAIL OF THE BOTTOM BASKET ON THE (CARGO SIDE). THIS RACK WILL BE BUILD SIMILAR TO
<br />THE PHOTOS PROVIDED. THE RACK WILL BE PAINTED SAME COLOR AS THE BODY.
<br />SUBTOTAL:
<br />$224,266.00
<br />SALES TAX (9.25%):
<br />$20,744.61
<br />CA TIRE RECYCLING FEE:
<br />$12.25
<br />$245,022.86
<br />TOTAL:
<br />NOTES:
<br />1. 25% DEPOSIT REQUIRED AT TIME OF ORDER.
<br />2. PRICE INCUDES LICENSING AND DELIVERY. SALES TAX BASED ON ORANGE COUNTY.
<br />3. PURCHASE ORDERS ARE TO BE MADE OUT TO PB LOADER CORPORATION.
<br />PB LosBer Corporation
<br />5778 W. Barstow • Fresno, Callfomla 11712-5024 • Telephone (559) 277-7370 • Fm (559) 277-7376
<br />Toll free 800a50-8521 • Web www.Fbloa4er.com
<br />
|