ALTERNET NETWORKS, INC. 1-2007 - Laserfiche WebLink

Home Browse Search

ALTERNETNETWORKSPROPRIETARY 8.2 T estine: All functional and performance requirements defined in the Next Generation Surveillance Specification shall be positively validated via Testing conducted at Consultant's development/engineering site prior to submittal ofRFPs by SAPD. All functional and performance requirements defined in the Next Generation Surveillance Specification, shall be positively validated in this testing. The Test Procedures shall defme the test method and specific pass/fail criteria for each requirement for the Next Generation Surveillance Specification. End-to-end performance testing shall be done whenever possible. The test procedure should also include a brief description of the method of evaluation and a block diagram of the intended test configuration. The test procedure shall also include a list of test equipment. The Consultant shall fully describe any special test equipment required for the tests. The Consultant shall submit the Test Procedures no later than 15 days prior to the commencement of the scheduled test. SAPD shall approve the test procedures or will respond by submitting comments within 10 days of receipt. If comments are made which require mutually agreeable revisions to the procedure, the Consultant shall make such revisions and resubmit the new version within 1 week of receipt of said comments. The testing shall begin only with the approved test procedure and written authorization from SAPD. All testing shall be witnessed by a SAPD representative. Data from a test which has been previously performed at a lower equipment level and any analysis submitted in lieu of test data shall be made available for review with the submittal of the test procedure. Test data shall be recorded in the test procedure in a prepared table that clearly defmes the pass/fail criteria for the test. The complete record of test data in the procedure shall become part of the test data package. The test data package shall include the recorded test data, analysis data, measurement data, reference to functional and performance pass/fail criteria and Next Generation Surveillance System Requirement. Upon completion of the Tests, the test report shall be submitted to SAPD for approval. 8.3 Site AcceDtance Test 8.3.1 Hardware and Software test at SAPD Hardware and Software testing shall be the responsibility of the Consultant. Testing tasks shall include, but not be limited to, the following activities: Commissioning of Next Generation Surveillance System equipment Commissioning of Video, Audio and Data cabling The Consultant will be responsible for performing testing of the Hardware and Software at SAPD. This test will be performed without the availability of the fully installed Next Generation Surveillance equipment. The purpose of this test is to verify the integration and configuration of the Hardware and Software at the SAPD command center and the modular capabilities of the System before SAPD's network is available. Successful completion of this test demonstrates the readiness of the Hardware and Software to begin thread testing with source from the Consultants hardware and software at outlining facilities carried across SAPD's Next Generations Surveillance Network. 23