Agenda Packet_2025-04-15 - Laserfiche WebLink

Home Browse Search

As directed by SA, the PM will arrange for J&G's consultant to perform an asbestos and lead- based paint survey and an abatement plan for asbestos and lead containing materials removal and disposal. When an asbestos and lead-based palnt survey has been previously prepared, the PM will arrange for J&G's subcontractor to prepare an abatement plan, The abatement plan will be submitted to the SCAQMD for their approval if required, The PM shall confirm that all required licenses, permits and certifications have been acquired for implementing the abatement plan. The PM will submit the SCAQMD approved abatement plan for SA's approval to proceed with its implementation. Upon SA's approval, J&G's abatement subcontractor will implement the abateinent plan, FS will verify waste is properly manifested for disposal at a proper facility. Upon completion of abatement plan implementation, the FS will conduct a pre-demolition survey to identify: that the asbestos, lead, regulated and hazardous wastes have been removed as per their abatement plans; verify inonitoring records; verify proper manifesting of waste disposal; visually verify no other hazardous materials are left in the demolition area; as required, verify site is secured by appropriate fencing; verify that appropriate protection devices are in place, such as pedestrian canopy; verify appropriate signing displayed (ie: no trespassing, keep out demolition in progress, danger, etc.); verify all utilities have been terininated; and erosion control measures are in place, as needed and required, The FS will use a checklist to complete the pre-demolition survey, The FS will confirm with the PM that the demolition area is ready for demolition. Structures ready for demolition will be clearly marked "CLEAR FOR DEMO J&G", FS will direct crews in: structure demolition; improvements demolition; salvaglng procedures; solid waste clearing and disposal. Where practical, concrete, asphalt, steel, non-ferrous metals, and wood will be segregated and sent off site for recycling. The site will be backfilled, graded and a minimum of 1" base material will be placed overentire lot with sand bags/wattles at perimeter. FS will review fieldwork daily for compliance with CTO specifications and record findings in a quality control log, Field personnel are trained to stop work upon discovery of suspect asbestos, regulated or hazardous waste, The FS will contact the PM, who in turn will contact SAA, The FS shall leave the work slte in a clean and neat condition, upon completion of the CTO. The PM will notify those agencies required for final inspections and sign offs, J&G Industries City Council 20 – 217 4/15/2025