Item 24 - Agreement No. 2025-01 - MLC Holdings

Home Browse Search

EXHIBIT A Conditions for Approval for Density Bonus Agreement Application No. 2025-01 The concession (deviation) as memorialized in the Density Bonus Agreement prepared in conjunction with Density Bonus Agreement Application No. 2025-01 are approved subject to compliance, to the reasonable satisfaction of the Planning Manager, with applicable sections of the Santa Ana Municipal Code, the California Administrative Code, the California Building Standards Code, and all other applicable regulations. In addition, it shall meet the following conditions of approval: The Applicant must comply with each and every condition listed below prior to exercising the rights conferred by the Density Bonus Agreement. The Applicant must remain in compliance with all conditions listed below throughout the life of the development project. 1. All proposed site improvements must conform to the Development Project (DP) approval of DP No. 2024-14 and the plans presented to the Planning Commission on the date of public hearing and project approval. 2. Any proposed amendment to the DP No. 2024-14, including modifications to approved materials, finishes, architecture, site plan, landscaping, unit count, mix, and square footages must be submitted to the Planning Division for review. At that time, staff will determine if administrative relief is available or if the Development Project Review must be amended. 3. The project shall comply with all applicable mitigation measures as identified by the Mitigation Monitoring and Reporting Program of the 2007 Environmental Impact Report (EIR) and 2018 Subsequent EIR (SCH No. 2006031041). 4. The Project shall comply with any and all recommendations contained with the technical studies and reports prepared for the Project. All studies and reports shall be finalized by the Applicant and approved by the City of Santa Ana prior to the issuance of any building permits. 5. Exterior building and exterior parking structure materials, finishes and colors for the Project shall comply with the approved materials board submitted for the Project and as approved by the Planning and Building Agency. Any changes to the materials, finishes and colors shall be approved by the Planning and Building Agency. All trash enclosures and similar ancillary structures shall match the texture, material and color of the primary building. 6. Walls and Fencing. a. The Applicant shall construct a minimum six-foot (6') tall solid perimeter wall, as measured from nearest adjacent finished sidewalk, surrounding the Project site. The perimeter wall shall conform to all applicable Citywide Resolution No. 2025-XX Page 7 of 10