SCOTT HEALTH & SAFETY 1 - 2010 - Laserfiche WebLink

Home Browse Search

equipment manufactured by Scott and/or designated by Scott required for the certified overhaul level inspection, repair, and service of Scott Products in accordance with Scott procedures. Scott manufactured test equipment or other testing equipment designated by Scott is to be maintained in good working order and calibrated following the maintenance schedule as outlined in the In-House Repair Center Handbook, or as directed by Scott. Scott manufactured test stands are to be calibrated solely for Scott Products and may be used only by Scott Certified Technicians and may not be used for testing any other device other than Scott Products. B.) In order to maintain the quality and the NIOSH certifications of the Scott Products being inspected, repaired or serviced, the IRC will purchase such commercially available test equipment specified by Scott as required for the overhaul level inspection, repair, and service of Scott Products in accordance with Scott recommended procedures. Such test equipment must be maintained in good working condition following the test equipment manufacturers' recommendations. The IRC agrees to adhere to the recommendations of the test equipment manufacturer. C.) If applicable, the IRC will be required to utilize software programs licensed to the IRC by Scott or third party software suppliers for the inspection, repair and service of Scott Products. The IRC shall not share, distribute or sublicense its licensed software with or to any other person or entity. 2.3 IRC Warranty Claims The IRC agrees that with respect to potential warranty claims on Scott Products purchased by the IRC, the IRC technicians will provide corrective action in accordance with the Warranty Procedure as described in the In House Repair Center Handbook. The IRC agrees that the total reimbursement of any warranty claim submitted to Scott by the IRC is limited to parts replacement only. The IRC acknowledges that it has paid no fee to Scott in connection with this Agreement 2.4 Adequate Records The IRC agrees to keep accurate and detailed records of all inspection, repair and service of Scott Products as per the procedure described in the In-House Repair Center Handbook. All inspection, repair and service records should be kept for a minimum of three (3) years from the date the transaction, inspection, repair, and/or service occurred. 2.5 Compliance with Certain Procedures The IRC agrees that if at any time the IRC receives from Scott a notification of certain procedures that the IRC is to follow concerning the recall or other safety or product improvement campaign or program, the IRC shall comply with it. If for any reason the IRC fails or refuses to comply with the procedures specified in such notification, the IRC assumes liability for non- compliance. The IRC acknowledges the necessity of complying with recall and other safety or product improvement notices to insure the protection of the user and to comply with governmental laws, orders, rules, and regulations.