Laserfiche WebLink
D. Shear Strength <br />Pocket Penetrometer <br />$11.00 <br />Torvane <br />$11.00 <br />Direct Shear-ASTM D 3080 (Regular Shear Rate=0.025 in/min, otherwise noted below) <br />Single Point Direct Shear with stress -strain curve (regular speed = 0.025 in/min) <br />$100.00 <br />3-Point Direct Shear with stress -strain curves (regular speed = 0.025 in/min) <br />$221.00 <br />3-Point Direct Shear with stress -strain curves (slow speed = 0.005 in/min) <br />$300.00 <br />Residual Shear Strength (5 passes of shearing, regular 0.025 in/min speed)) <br />$378.00 <br />Shelby Tube Cutting, Trimming or Remolding of Specimens (per sample) <br />$45.00 <br />Static Uniaxial and Triaxial Strength Tests <br />Unconfined Compression (UC) - ASTM D2166 $126.00 <br />Unconsolidated Undrained (UU,Q) -ASTM D2850 $153.00 <br />Consolidated Undrained (CU,R) with Pore Pressure Measurement (per point) -ASTM D4767 $357.00 <br />Consolidated Drained (CD,S) with Volume Change on Sands (per point) - ASTM D7181 $357.00 <br />Three -Staged CU Triaxial Tests ()sample, 3 confining pressures) $788.00 <br />Shelby Tube Cutting, Trimming or Remolding of Specimens (per sample) $45.00 <br />E. Consolidation and Swell Tests <br />Consolidation Test-ASTM D2435 <br />Double increment loading up to 12.8 or 16 ksf and unload (10 total loads) (no full time readings/plots) $189.00 <br />Each additional load or unload without full time readings/plots $16.00 <br />Full time readings and plot of time curve per load $42.00 <br />Shelby Tube Cutting, Trimming or Remolding of Specimens (per sample) $42.00 <br />Expansion Index Test-ASTM D4829 $105.00 <br />Single Load Swell/Collapse Test-ASTM D4546 $105.00 <br />F. Permeability Tests <br />Constant Head Permeability of Granular Soils -ASTM D2434 <br />$195.00 <br />Triaxial Permeability in Flexible -Wall Permeameter- ASTM D5084 <br />-Measurement at One Effective Stress <br />$195.00 <br />-Each Additional Effective Stress <br />$84.00 <br />Shelby Tube Cutting, Trimming or Remolding of Specimens (per sample) <br />$45,00 <br />G. Rock Core Tests <br />Uniaxial Compressive Strength of Rock Core (no stress -strain curve) <br />$163.00 <br />-Initial Tangent Modulus of Elasticity <br />Call for Pricing <br />Rock Core Cutting (per specimen) <br />$45.00 <br />Slake Durability (ASTM D4644) <br />$200.00 <br />Point Load Index (ASTM D5731) <br />$111.00 <br />H. Other Special Tests <br />Pin Hole Dispersion <br />$273.00 <br />Using pH to Estimate the Soil -Lime Proportion Requirement for Soil Stabilization, ASTM D 6276 <br />$179.00 <br />LA Abrasion, ASTM C 131 <br />-Method A <br />$268.00 <br />-Method B & C <br />$200.00 <br />-Method D <br />$132.00 <br />I. Sample Pickup, Disposal and Return Policy <br />Sample Pickup up to 150lbs within 30 miles radius area (24-hour notice is required) <br />$125.00 <br />Sample Disposal Policy: <br />The remaining portions of tested samples will be disposed of 30 days after project completion without notice. <br />A disposal fee of $15 per bag will be imposed on all untested bulk samples. <br />J. Rings and Cans <br />Preparation of clean rings and cans (recycled 6 rings per can) <br />$5.00/can <br />For inquiries please call our office at (909) 869-6316 or email tojustin@aplaboratory.com <br />Pang 2 of 2 <br />