Laserfiche WebLink
ICE Company: <br />ICS has been working with a local company that produces and bags ICE for resale throughout the state of <br />California for over 10 years. ICS provides 24 hour remote and onsite service for both the Milpitas and <br />Modesto plant. <br />Modesto PLC Plant Upgrade Project 1(2022) <br />Replace Main Freezer and ICE packaging lines GE 9030 PLC and 10 and 3 remote 10 drops located in roof <br />mount ICE makers. Back up GE PLC program and translate to Allen Bradley Studio 5000 <br />software. Existing HMI was replaced with Aveva System Platform SCADA system. The SCADA PC was <br />loaded with PLC and HMI programming software that allowed ICS to remote access to assist with trouble <br />shooting and make additional changes. Field work included remove old PLC from existing control panels, <br />re -wiring, replace wire labels, and install ferrules. Install new Allen Bradley 1769-L33ER PLC and 12 10 <br />cards into existing control main panel located in freezer. Additional circuit protection, and relays and <br />Power Supplies were added as needed. At the same time, we removed 3 Remote 10 drops located in <br />roof mount control panels. The replacement of all main PLC and 2-3 remote 10 drops were completed <br />onsite during a 3-day shutdown. We did the 10 check out on the 3rd day. This was followed by 3 days of <br />commissioning and startup. <br />Modesto PLC Plant Upgrade Project 2(2023) <br />Replace PLC ICE maker 3 Automation Direct (GE -Series 1) PLC in place. Replace Automation Direct <br />program and translate to Allen Bradley Studio 5000 software to be added as 4th RIO drop to recently <br />upgrade Allen Bradley 1769-L33ER PLC. Integrate into existing Aveva System Platform SCADA <br />system. Remove old PLC wiring, replace wire labels, and install ferrules. Install new Allen Bradley Flex 10 <br />Ethernet adapter and 10 cards into existing roof mount ice maker control panel. Additional circuit <br />protection, and relays and Power Supplies were added as needed. The replacement of the 4th ICE <br />Maker control panel remote 10 was completed onsite during a 1-day shutdown. We completed the 10 <br />check out the same day. This was followed by 1 days of commissioning and startup. <br />151 Page <br />