Laserfiche WebLink
Local Assistance Procedures Manual <br />Exhibit 16-T1 <br />Materials Requiring a Certificate of Compliance per Caltrans Standard Specifications <br />Table 6-2.3 Materials Accepted by Certificate of Compliance (4 of 7) <br />Material/Product <br />Remarks (Including Requirements for Additional Back -Up <br />Information Required with Certificate of Compliance) <br />Joint seal (Type B) <br />Certificate of compliance required for: <br />• Elastomeric joint seal <br />• Lubricant -adhesive <br />Certificate of compliance must be submitted with certified test report for each <br />lot of elastomeric joint seal and lubricant -adhesive. Test reports must include <br />the seal movement rating, the manufacturer's minimum uncompressed width, <br />and test results. <br />Joint seal assemblies with a movement <br />For alternative joint seal assemblies, a certificate of compliance must be <br />rating of 4 inches or less <br />submitted for each shipment of joint seal materials. The certificate must state <br />that the materials and fabrication involved comply with the specifications and the <br />data submitted in obtaining the authorization for the alternative joint seal <br />assembly. <br />Joint seal assemblies with a <br />movement rating over 4 inches <br />Lime <br />Certificate of compliance must include a statement certifying the lime <br />furnished is the same as on the authorized material source list. <br />Certificate of compliance for each reel of PVC strip must include: <br />1. Name of manufacturer <br />Machine spiral wound PVC <br />2. Plant location <br />pipeliners <br />3. Date of manufacture and shift <br />4. Cell classification <br />5. Unit mass <br />6. Average pipeliner stiffness and profile type <br />Certificate of compliance required for: <br />Markers <br />1. Metal target plates <br />2. Enamel coating <br />3. Retroreflective sheeting <br />Certificate of compliance required for: <br />Masonry block <br />1. Concrete masonry units <br />2. Aggregate for grout <br />3. Grout <br />Micro surfacing emulsion <br />Mulch <br />Open steel flooring and grating <br />Overside drains <br />Certificate of compliance based on steel materials, aluminum materials or <br />plastic materials. <br />Parking area seal material <br />Pavement markers <br />Pavement marking Paint <br />or thermoplastic <br />Plastic lumber <br />Laboratory test report. <br />Plastic traffic drums <br />Certificate of compliance must include average pipe stiffness, resin <br />material cell classification, and date of manufacture. <br />Plastic pipe for drainage <br />For corrugated polyethylene pipe, manufacturer's copy of plant audits <br />and test results from the National Transportation Products Evaluation Program <br />for the current cycle of testing for each pipe diameter furnished. <br />Portable changeable message sign <br />Precast concrete Cementitious <br />Certificate of compliance must be signed by the precast concrete product <br />material used in precast concrete <br />manufacturer. <br />products <br />Page 4 of 7 <br />January 2020 <br />