Laserfiche WebLink
Exhibit A <br />July 23, 2025 <br />30 <br /> <br /> <br /> <br />Non-Uniform Ellipses Alternate <br />An alternate method of measuring non-uniform ellipses is by dividing the ellipses into uniform parts and <br />utilizing the non-uniform round method as described above. An example is shown below. <br /> <br /> <br /> <br />VI- Measurement Techniques - Aerial <br /> <br />Please note that aerial inspections are allowed for area-based pre-inspections only. <br /> <br />Aerial inspections must be performed using GIS software, such as ArcGIS, NearMap, or GoogleEarth. Imagery <br />resolution should be at least 1 foot. Google MyMaps or Google Maps will not be sufficient for performing aerial <br />inspections. If you would like an exception or have a question about a specific method, please ask MWDOC. <br /> <br />When performing aerial inspections, please see the steps: <br />x Look up the site address in your GIS system. <br />x If measuring aerially is difficult due to tree cover or other issues, you must perform an on-site pre- <br />inspection. <br />x Use the site plan and/or customer-submitted photos as a guide for measuring the application areas. <br />x Draw out one or more polygons measuring the area on the map. <br />x Screenshot the aerial measurement with the polygons that must be uploaded to the Droplet portal. <br />x Complete pre-inspection form and upload it to Droplet portal. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />"!#  <br />       <br />