HCI SYSTEMS, INC. (2) - Laserfiche WebLink

Home Browse Search

Docusign Envelope ID:88AA74OA-D311-464C-87AC-45D747CFOCDA SCOPE OF WORK • Ensure that cabinet is free from exterior obstructions (maintain 36" access) • Inspect cabinet glazing for damage Annual Inspection and Testing of Fire Protection Systems Annual inspection and testing to include all Quarterly requirements. 1. Wet Sprinkler Systems and Standpipes 2. Water Flow Alarm Devices • Verify water flow devices are free of physical damage • Testing shall be accomplished by opening the inspector's test valve • Alarms must report to the fire panel within 90 seconds of flow • Test in accordance with the manufacturer's instructions • Note: Water flow devices include Water Motor Gongs, Pressure Switch, and Vane type 3. Main Drain at Each Riser • Test main drain • Record initial static pressure • Record residual pressure • Record restored static pressure 4. Control Valve — Position and Operation • Each valve shall be operated through its full range of motion • Test that all tamper switches must report to the fire panel • Verify that the signal does not restore at any valve position except the open position • PIVs shall be opened until spring or torsion is felt on the rod, indicating that the rod has not become detached from the valve • PIVs and OS&Ys shall be backed one-quarter turn from the fully open position to prevent jamming 5. Sprinklers • Inspect all exposed sprinklers for paint, corrosion, and leaking • Inspect all sprinklers for flow obstructions (i.e. light fixtures, exit signs, storage— 18" from ceiling) • Inspect all sprinklers for the proper spacing and location per NFPA 13 6. Hangers and Seismic Braces • Inspect from floor level • Inspect for looseness and damage • Concealed hangers and braces do not need to be checked City of Santa Ana lFB No. 25-047 Page 17 of 34