Laserfiche WebLink
Construction documents: Construction documents shall be prepared by a California registered <br /> design professional(structural engineer) in accordance with the California Building Code and ANSI <br /> E1.21 where applicable. Documents shall include: <br /> 1.A summary sheet showing the building code used, design criteria, loads and support reactions. <br /> 2. Detailed construction and installation drawings. <br /> 3. Design calculations. <br /> 4. Operating limits of the structure explicitly outlined by the registered design professional <br /> including environmental conditions and physical forces. <br /> S. Effects of additive elements such as video walls,supported scenery, audio equipment,vertical <br /> and horizontal coverings. <br /> 6. Means for adequate stability including specific requirements for guying and cross-bracing, <br /> ground anchors or ballast for different ground conditions. <br /> Designation of responsible party: The owner of the temporary special event structure shall <br /> designate in writing a person to have responsibility for the temporary special event structure on <br /> the site. The designated person shall have sufficient knowledge of the construction documents, <br /> manufacturer's recommendations and operations plan to make judgments regarding the <br /> structure's safety and to coordinate with the fire code official. <br /> Operations plan: The operations plan shall reflect manufacturer's operational guidelines, <br /> procedures for environmental monitoring and actions to be taken under specified conditions <br /> consistent with the construction documents. <br /> Means of egress—The means of egress for temporary special event structures shall comply with <br /> California Fire Code. <br /> For official code standards, refer to the California Fire Code (CFC) section applicable to <br /> Temporary Special Event Structures. <br />