FULL PACKET_2011-06-06 - Laserfiche WebLink

Home Browse Search

5.2 Drags 5.2.1 Scarifying Drag: Used to scratch up or loosen up the skinned area. The drag shall be made of heavy - duty steel capable of carrying additional weight (`s). Digging teeth shall be hardened and pointed and be 1/2" in diameter. Pull chain shall be included. 5.2.2 Cutting and Leveling Drag: Used to level and backfill low spots in the skinned area. The leveling drag and cutting blades shall be made of galvanized steel. This drag shall feature cutting blades that are adjustable and capable of cutting down dirt build -up (high spots)and depositing dirt into holes (low spots) creating a smooth and level playing surface. Pull chain shall be included. 5.2.3 Grooming or Finish Drag: Used to complete dragging procedure on a daily basis and lighter /gentle movement of brickdust. This drag shall be galvanized metal "door -mat" link. Pull chain shall be included. Drag shall be 6' in length by 6' in width. 5.3 Other Equipment 5.3.1 Hand Tamp: 20 lb. variety with 48" min. handle. Used to compact worn areas around bases, home plate and pitching mound. 5.3.2 Plastic Sheeting and Duct Tape: Used to wrap hand tamp head and help prevent wet clay from sticking. 5.3.3 Grade or Grooming Rake: ake: Used to rake and fine level areas. Shall be made of aluminum, 36 "wide and a 6'handle. 5.3.4 Heaw Duty Shovels: Used to move material. Round /Square Point and Scoop shovels. 5.3.5 Heaw Duty Hose: Used to water down skinned area. Shall be 3/4" tol" top quality construction with 225 -psi working pressure. Leaks of any kind are not permitted. Contractor shall have a minimum of 175' of hose on hand at all times. 5.3.6 High Pressure Nozzle: Attached to hose. Use to spray down brickdust and push excess brickdust off turf edges. 5.3.7 Industrial Push Broom: Used to remove excess brickdust from turf edges. Shall be 24" min. wide with heavy -duty dual weight bristles. 5.4 Wet Conditions Equipment" (Add to equipment above) During periods of inclement weather or when the areas are wet the contractor shall have "on- hand" during all brickdust maintenance operations the following items: 5.4.1 Squeegee: Used to push /squeeze water off wet areas or into dry areas or drains. Shall be 24" to 36" wide with neoprene blade and magnesium /aluminum head. 5.4.2 "Super Sopper ": Used to collect standing water in brickdust areas. Shall be drum type with exterior sponge and arm holding drum. 5.4.3 Diamond or Beckson Pump: Used to remove standing water in brickdust areas. Shall be plastic with flexible piston and value. 5.4.4 Infield Sopper with Wringer and Bucket: Used to collect standing water in brickdust areas. Sopper shall be geotextile- covered sponge typical for absorbing chemical spills. r+ S?I �