31A - CUP - 601 S SANTA FE ST - Laserfiche WebLink

Home Browse Search

b. Branch disbursement should be random so that longer branches and shorter branches are intermingled to give a natural appearance. c. Branches should exceed all antennas by a minimum of 12 inches. d. Branches should start at 15 feet above the ground. e. There should be a minimum space of seven feet between the top of the antenna and the top of the branches. f. Branches should have an upward sweep similar to that of actual Canary Island Pines. g. Branch foliage color should be an olive green with some brown "needles" to match an actual Canary Island Pine. A sample should be submitted for approval prior to fabrication. h. Full bark cladding with a custom color should be submitted for approval prior to fabrication. i. All antennas shall be covered with "pine antenna socks" that match the approved foliage color. j. All "stand-off mounts" and support pipe mounts shall be concealed behind antennas and painted a darker shade or green (or black) with a "flat" paint finish to reduce reflection and visibility of the mounting. k. Include the tree specifications (selected manufacturers and models) with photo simulations (also a site plan review requirement). 1. Show the location of the GPS antenna on all elevations. m. Provide a "unistrut" detail for the utility cabinet; an "H-frame" is not acceptable. n. Provide a note on the plans stating "install underground utilities sleeving for two carriers during construction of the structure". Shrouds on the outside of the pole are not acceptable. o. All exterior conduit and electrical meters shall be installed and screened in one metal enclosure painted to match the structure. 6. At all times, the permit applicant shall not prevent the City of Santa Ana from having adequate spectrum capacity on the City's 800 MHz radio frequency. Exhibit A Page 2 of 3 Resolution No. 2011-12 Page 5 of 6 31 A-18