MACADEE ELECTRICAL CONSTRUCTION - Laserfiche WebLink

Home Browse Search

EXHIBIT A SCOPE OF SERVICES PART 1— SCOPE OF WORK This Request for Proposal calls for the removal and replacement of the existing street light cable in the Oakmont Avenue and Fairmont Avenue Neighborhoods. This project will require replacing all the cable in the entire system with new #8 THW wire. The thirteen existing poles will be required to be rewired with new #12 THW wire, the existing fixtures removed and salvaged, replaced with new metal halide fixtures and lamps. The new fixtures may need minor modifications to fit existing pole configurations. Costs for modification shall be included in proposal amount. A new energized service pedestal has been installed. Proposer shall locate and intercept existing conduit adjacent to service pedestal and install conduits to pull box adjacent to pedestal. All costs for conduit work, including hardscape replacement, to connect to service pedestal shall be included in lump sum costs. New wire shall be placed into and connected properly in service pedestal. All work, equipment, labor and materials necessary to provide complete functioning system shall be included in the Proposal pricing. Existing globes shall be protected and reused. The neighborhood street light system was installed in the early 1920's and is obsolete. The exact condition and location of the underground conduit is unknown although the existing cable was installed 10 years ago. The City expects the existing cable to be used to pull the new wire in. Pre -lubrication of the conduits may be necessary. The City does not anticipate that much of the existing conduit will need to be repaired. All costs for conduit repair excluding materials will be included in the costs proposed for hourly work. The Oakmont Avenue and Fairmont Avenue Neighborhoods have approximately 3500 linear feet of cable: Scope of work includes the following: • Remove existing cable from conduit. • Intercept existing conduit and install new conduit to connect to new service point as shown on plan. • Re -wire system using existing conduit. • Replace any deteriorated conduit only if it is impossible to pull the new wire through. • Remove and salvage existing fixtures. • Rewire poles and install new fuses, fixtures, lamps etc. per City Standard #1126-F. Material List: • Fixtures: ULT. M70 MLTLC3M500K 70W multi -tap ballast w/starter (26 + 2 spare) • Wire: #8 THW red, black, green / #12 THW red, black, green • Lamps: Philips CDM 70/C/J/M MH LAMP (26 + 2 spare) • Conduit: 2" Schedule 80 PVC • Fuses: 240V l0A with holder per City Standard #1126-F (2 per pole + 2 spare) E