FULL PACKET_2013-01-22 - Laserfiche WebLink

Home Browse Search

COOPERATIVE AGREEMENT NO. C-2-9992 ATTACHMENT A • Corridor lane configurations and lane widths; • Existing street and lane geometries, curbs, and medians; • Upcoming improvements to the corridor; • Traffic signs and pavement markings at all PROJECT intersections, approaches to cross streets, and along PROJECT corridor; • Traffic signal control device information, such as type of device, brand and make, condition of equipment. Intersection Photographic Documentation Log shall be required; • Existing signal operation characteristics - signal phasing, cycle lengths, phase sequence alteration, and protective-permissive, etc.; • Existing controller and telemetry/interconnect equipment; • Existing time-referencing setup; • Existing Central Master Equipment; • Existing Field Master Equipment; • Open each controller cabinet and take digital photos of all equipment inside; • Note any deficiencies of traffic control equipment at each intersection; and • Note the maintenance condition or existence of the traffic signal equipment, controllers and synchronization related infrastructure. CONSULTANT shall also investigate factors that are expected to affect signal progression including, but not limited to: intersections with high pedestrian or bicyclist volumes; over-saturated intersections; uneven lane distribution; high volumes of trucks and buses; high-volume un-signalized intersections, including interchanges; parking maneuvers; presence and location of bus stops; differing signal timing patterns among AGENCIES; etc. With the view of assisting, enhancing, and improving the traffic operations along this corridor, CONSULTANT shall identify any deficiencies of the existing traffic signal control and telemetry infrastructure, and geometric layout, and provide recommendations towards simple solutions that may be implemented to correct such deficiencies. CONSULTANT shall prepare a report summarizing the findings of the field review. If deemed necessary by the APM or through request of an AGENCY through the APM, CONSULTANT shall prepare any design construction documents in the form of sketches to full-fledged Plans Specifications and Estimates (PS & E). CONSULTANT shall prepare such plans for use in the construction of the PROJECT per each respective AGENCY's standards. CONSULTANT shall supply such documentation to the APM and the AGENCY owning the affected facility for approval prior to commencing any construction. Construction documents will be used during the course of construction by AGENCY for inspection services. CONSULTANT shall modify documents subject to approved construction completion to owning AGENCY as an As - Built document. Cost for production, reproduction, inspection services, and as - built services are part of the Full Fixed Price of the Contract and/or CTO and no additional compensation shall be allowed, therefore. 6 25D-23