Laserfiche WebLink
APPENDIX <br />Guidelines for Standard Licensee Improvements <br />The following criteria are provided to aid in the development of a conceptual plot plan to be submitted <br />to Southern California Edison Company herein after referred to as "Licensor" for consideration and <br />approval prior to the start of anu construction on "Licensor" provers. <br />Plans should be developed indicating the size and location of all planned improvements. The plan <br />should specify the dimensions of all planned improvements as well as the distance of all planned <br />improvements from property lines and all adjacent "Licensor" towers, poles, guy wires or other <br />"Licensor" facilities. <br />The plan must show the locations of all "Licensor" towers and poles, 16 -foot wide access roads, main <br />water lines and water shut -off valves, electrical service lines and parking areas. All plans must <br />indicate adjacent streets and include a "north arrow" and the Licensee's name. <br />SHADE STRUCTURES <br />(Definition: A non-flammable frame covered on the top with a material designed to provide shade to aid <br />in growing plants) <br />1. Shade structures must maintain minimum spacing of 50 feet between shade structure locations, <br />should be placed perpendicular to Licensor's overhead electrical conductors (wires) unless <br />otherwise approved in writing by Licensor, and should not exceed maximum dimensions of: <br />a. 100 feet in length <br />b. 50 feet in width <br />c. 15 feet in height <br />2. Shade structures will not be permitted within the following areas reserved for Licensor's access: <br />a. Within 2 feet from edge of 16 -foot wide access roads <br />b. 50 foot radius around suspension tower legs, H- Frames and poles <br />c. 100 foot radius around dea,- -end tower legs, H- Frames and poles <br />d. 25 foot radius around anchors /guy wires, poles and wood poles <br />3. Shade structures must utilize the following design: <br />a. Temporary/ slip joint construction only <br />b. Non - flammable frame only <br />c. Adequately grounded by a licensed electrical engineer <br />d. Shade covering must be non - flammable and manufactured with non - hydrocarbon <br />materials. <br />Initial( IMO )/( ) <br />Licensor/ Licensee <br />11.20.2012_x9.1 <br />