Laserfiche WebLink
4. Sprinkler controllers must be located at the edge of the right of way <br />5. Suitable identification markers will be required on main controllers and valves <br />6. Locations of main shut off valve will be provided and shown on a plot plan <br />7. Underground facilities must have a minimum cover of three feet <br />8. Earth disturbed must be compacted to ninety percent (90 %) <br />LANDSCAPING <br />1. No trees will be permitted under the overhead electrical conductors or within 20 feet of the "drip <br />line" of the conductors <br />2. Trees must have slow to moderate growth, and must be of a variety that grows to a maximum <br />height of no more than 40 feet and must be maintained by the Licensee at a height not to exceed <br />15 feet <br />3. Placement of large rocks (boulders) must be approved in writing by Licensor <br />4. Any mounds or change of grade must be approved in writing by Licensor <br />5. No cactus or thorny shrubs will be permitted <br />6. Retaining walls, planters, etc., must be approved in writing by Licensor <br />TRAILERS (Definition: Removable / portable office modules are notpermitted without Licensor's prior <br />permission. Trailers must meet the following criteria to be considered: Trailers must meet the following <br />criteria: <br />a. Must have axles and wheel and be able to be moved at any time <br />b. Maximum length: 40 feet <br />c. Maximum height: 15 feet <br />d. Maximum width: 12 feet <br />2. No trailers will be permitted within the following a. .as reserved for Licensor's access: <br />a. Within 2 feet from edge of 16 -foot wide access roads <br />b. 50 foot radius around suspension tower legs, H- Frames and poles <br />c. 100 foot radius around dead -end tower legs, H- Frames and poles <br />d. 25 foot radius around anchors/ guy wires, poles and wood poles <br />e. Under or within 10 feet of the conductor "drip lines" <br />3. Sewer or gas lines to trailers must be approved in writing by Licensor <br />4. Location of all electrical and telephone lines must be approved in writing by Licensor <br />5. Electrical lines must be installed by a licensed electrical engineer. <br />-3- <br />1L20.2012 V9.1 <br />Initial (VAO )/( ) <br />Licensor /Licensee <br />