Laserfiche WebLink
EXHIBIT C <br />`✓ALE <br />2 o{�° p <br />SANTA ANA AUTO HALL o adatw <br />ARCHITECTURAL DESIGN STANDARDS <br />The following standards are to be used as guidelines for the execution of all <br />dealerships in the above - mentioned mall, These are design standards intended <br />primarily for architectural control, therefore, the Municipal Code and the <br />City's "Design and Development Standards" must still be followed. The Archi- <br />tectural Design Review Board will give preliminary, intermediate and final <br />approval of all dealership designs based upon adherence to these standards. <br />It is not the intent of these standards to have as a final product dealerships <br />which are exactly the same. However, it is intended that there be uniformity <br />in direction, restricted selection and treatment of elements and finishes, <br />and repetition of certain common elements which will tie the entire complex <br />into a homogeneous entity. <br />A. DIMENSIONAL RESTRICTIONS <br />1. Setbacks: <br />The glazed surface of all showrooms must be a maximum of 100 feet from <br />the property line on the public road frontage. The minimum dimension <br />shall not be less than 40 feet. The minimum dimension between the <br />aforementioned property line and the edge of any service building must <br />not be less than 85 feet. Side and rear yard minimums are not set by <br />this document. Local codes must be followed, <br />ARCHITECTURE I ENGINEERING I PLANNING <br />3452 EAST FOOTHILL BOULEVARD SUITE 1100 • PASADENA, CALIFORNIA 91107 • (213) 681 -84eg (818) 21a1 <br />