Laserfiche WebLink
the highest degree of detailing, materials and workmanship will have <br />to be observed. Here again, metal horizontal banding must be incor- <br />porated. <br />8. Concrete Panels: <br />Tilt -up /pre - formed concrete panels may be used in perimeter wall and <br />building wall applications. <br />The form liner profile specifications and configuration that may be <br />used must be equal to those produced by Symons Corporation's Architec- <br />tural Form Liners. The five options are to be equal to: <br />a. 3/16" deep, short ripple rib 4' -10" (no reveal) <br />b. 1/4" deep rib, 4' x 10' (reveal) <br />c.. Extruded 1V rib, 2" O.C., 1' x up- to -30' (no reveal), run <br />horizontally <br />d. Sandblast 12 medium, 4' x 10' <br />e. Sandblast #3 coarse, 4' x 10' <br />Here again, continuous and horizontal metal reveals must be incorpor- <br />ated to tie complex together and to be used at construction joints. <br />9. Concrete Block: <br />Concrete block masonry may be used for wall construction in the <br />dealership service areas. It is important to remember that the clean, <br />- 8 - <br />8 -219 <br />