Laserfiche WebLink
SPR NO. 2015-02 <br />APRIL 21, 2015 <br />PAGE 4 OF 6 <br />25. Prior to occupancy of any units, a rental housing execution plan must be submitted <br />to the Planning Division for review and approval. At a minimum, the plan shall <br />identify the location of employee and visitor parking, the location of the rental office, <br />hours of operation for the rental office, and signage affiliated with the Rental <br />Housing Operational Plan. In addition, the rental plan must clearly note that the <br />parking and project amenities must be provided free of charge to the residence. <br />26, Prior to submittal into building plan check, the design for the courtyard gates shall <br />be submitted to the Planning Division for approval. The fences /gates shall be <br />decorative and ornamental in nature as they are the entries to the interior <br />courtyards. <br />27. The following best management practices (BMPs) need to be incorporated into the <br />project construction and operation to minimize greenhouse gas impacts: <br />a. Install energy efficient lighting, appliances, heating, and cooling systems. <br />b. Install efficient lighting for street and other outdoor lighting. <br />C. Reduce unnecessary outdoor lighting. <br />d. Provide education on energy efficiency to residents and /or tenants. <br />e. Install water - efficient irrigations systems and devices. <br />f. Design buildings to be water - efficient. Install water - efficient fixtures and <br />Provide education about water conservation. <br />Provide easy and convenient recycling opportunities for residents and <br />tenants. <br />Provide education on recycling waste. <br />28. Designated outdoor common or residential areas shall provide outdoor signage <br />informing the public of the presence of operating aircraft. <br />29. Prior to the issuance of any building permit, a storage plan shall be submitted and <br />approved indicating storage areas measuring a minimum of 256 cubic feet per <br />residential unit within the project's garage and assigned to each unit at no additional <br />31. Prior to submittal into building plan check, provide revised plans reflecting the <br />following changes: <br />a. Minimum 136 (49 %) total units containing two and three bedrooms. <br />b. Average overall project unit size of 915 square feet. <br />C. Smallest unit to be no smaller than 614 square feet for a maximum of nine <br />units. <br />Exhibit "A" <br />75A -114 <br />