Laserfiche WebLink
Project Execution <br />e) Prepare and submit a TCR. <br />7.3.2.2 Client Responsibilities <br />a) Provide input and updates to the SMS sheet to support the Code File building as required in the Final <br />Project Schedule. <br />b) Participate in Code File validation conference calls. <br />e) Continue building the System Code Files (those not built by TriTech) after DOLE (refer to Appendix A - <br />Required Inform CAD DOLE Code File build). <br />d) Review and approve applicable TCRs. <br />Completion Criteria <br />This task is considered complete when: (i) the system has been installed at the client site, and (ii) the "Pre- <br />DOLF" code files are entered into the CAD Subsystem by TriTech. <br />7.3.3 Geographical Information Services <br />7.3.3.1 GIS Source Data Evaluation <br />The TriTech GIS Analyst will work with the Client to perform a one-time evaluation and initial conversion <br />of the Client provided street center -line GIS data. Client supplied GIS data must be from a single integrated <br />source when delivered to TriTech for conversion. This analysis will include the following: <br />a) Routing and Navigability - The data will be analyzed to ensure that there are no breaks in the road <br />network and that an acceptable percentage of addresseS2 within the service area are routable with <br />impedances or speed limits, applicable turn restrictions (one way data), elevations for overpasses and <br />street types. <br />b) Addressing — Evaluate data for the presence of block ranges, street types, and city designators. <br />c) Supplemental Coverage - An evaluation of GIS data that may be available for response areas, ESRI <br />compatible overlays including satellite image, and applicable point data to ensure compatibility. <br />A report will be presented to the Client upon completion of the GIS source data analysis prior to the import <br />of GIS data into one or more Systems or Subsystems. If there are significant problems with the data, <br />additional GIS work and analysis may be required. <br />7.3.3.2 TriTech Responsibilities <br />a) ,Evaluate Client -supplied GIS data to ensure it is formatted correctly for street -centerline display, address <br />point usage and address functions. A report will be generated based on this analysis. <br />b) Evaluate Client -supplied GIS data to ensure it is formatted correctly for routable functions. A report will <br />be generated based on this analysis. <br />c) Evaluate Client -supplied GIS data to ensure it is formatted correctly for Inform CAD Quickest Path Unit <br />Recommendations functionality. <br />d) Review the Client -supplied GIS layers for Inform CAD and hiform Mobile. <br />z The phrase "acceptable percentage" refers to a decision that the Client must make regarding the acceptable level of navigability <br />needed within the street centerline network, Since editing and maintaining the street data is a Client responsibility, the Client will <br />have to evaluate and make a judgment regarding the impact of the level of accuracy and the cost associated with increasing the <br />navigability of the data. <br />27 <br />