25G - AGMT - SANITARY SEWER SYS - Laserfiche WebLink

Home Browse Search

MAR"rCOVIERO 5YS7M%45- TURNING YOUR DATA INTO DECISIONS" SECTION 4: INSTALLATION AND ACTIVATION Installation It is most important to note that the SmartCover installation never requires confined space entry. With this, a typical installation is inexpensive and takes much less than one hour for physically attaching of the SmartCover® system. The antenna is mounted to the top of the cover or lid and the mouthing bracket, housing the PowerPack and E -Box with the DSM connected to the E -Box, to the bottom. The antenna is mounted and secured with a high strength, MIL -Spec grade, two part adhesive and a hole is drilled to feed the antenna wire to the underside where the E -Box control is located. The bracket is mounted to the underside by drilling to two holes into the cover or lid. Two stainless steel screws secure the bracket. The DSM is connected to the E -Box control and it is suspended and aligned to the flow target area i.e., the invert. On -site testing of the communication link is performed to ensure that the unit is operational. • Standard Installation: The SmartCover® system (hardware) is installed in the field at the designated site. • Offsite Installation: The SmartCover® system is installed on the selected cover at an offsite facility and transported to the designated location. This method can minimize onsite time to a few minutes reducing the need for traffic control and disruption. • Typically, the Customer will provide personnel and equipment, as appropriate for traffic control as required by local regulations and safety of field personnel. Activation After the physical installation of the SmartCover® system(s), the following actions are taken to bring full functionality to the SmartCover° system. SCS technicians will assist with all installation activation as part of our standard service protocol. • SmartCover® Activation: Customer Actions • Upon receipt of a Purchase Order, SCS the user will receive a questionnaire to obtain the information necessary to perform the SmartCover® service Set - Up. Proper system operation is dependent upon receipt of required information. • This information is used as part of installation where communication will be tested to verify functionality. • SmartCover° Activation: SCS Actions • At the SCS technical Support offices, the secure Customer Web Site is set up including a private account and database on the SCS secure server. • Web site is configured for the Customer Web Site with SmartCover® system locations and users. • Initial population of the Customer SmartCover ®database. • Registration of the SmartCover® system wireless radios with the network and setting the Customer default system operational parameters. Training Training is provided after completion of the installation process. Once on -site personnel are trained, SCS will be available to provide additional web site training remotely after the SmartCover® system has been installed and operational. 13 SmartCover° SystemsTM 2067 Wineridge Place, Suite E, Escondido, CA, 92029 760 - 291 -19 w. ronex.com Hadronex, Inc. is now doilfiz SmartCover° SystemsTM