Laserfiche WebLink
SPECIFICATIONS <br /> Solid Waste collection and Recycling plastic carts ("carts") for curbside service, City of Santa Ma, <br /> California <br /> Description <br /> Size A:35 gallon <br /> Depth: 23.75 inches maximum(including handles) <br /> Width: 19 inches maximum <br /> Height: 35 inches maximum(to body rim) <br /> Size B:64 gallon <br /> Depth: 27 inches maximum (Including handles) <br /> Width: 24 inches maximum <br /> Height: 39 inches maximum(to body rim) <br /> Size C:96 gallon <br /> Depth: 34.5 inches maximum(including handles) <br /> Width: 26 inches maximum <br /> Height: 43 inches maximum(to body rim) <br /> All three sizes must be available in green, grey and burgundy. <br /> Technical Requirements <br /> 1. Body: Carts shall be injection molded of virgin high density polyethylene plastic. The body <br /> of the cart shall be molded to present a smooth interior and exterior surface. The body of the <br /> carts shall have a minimum wear strip under the floor of%2 inch (protecting the floor from <br /> abrasive contact with the street surface). <br /> 2. Material: Recyclable polyethylene, U.L. approved with a rating of HB or better. <br /> Average Wall Thickness: Size A: Not less than .140 inch <br /> Size B: Not less than .160 inch <br /> Size C: Not less than.165 inch <br /> Carts shall be suitable for use in temperature of >120° F to -20°F. All plastic and <br /> component parts used in the construction of the carts shall be recyclable into other <br /> polyethylene products. Crosslink resin is not acceptable. All carts shall be manufactured <br /> with a minimum of 20%post consumer recycle content. <br /> Carts shall be manufactured with a UV stabilizer. The UV stabilizer shall be added in the <br /> solution during the polymerization,prior to pelletizing, compounding and molding. <br /> Independent laboratory tests of the carts bid must accompany bid samples certifying <br /> compliance as specified in part 2 of the detailed specifications. <br />