SIEMENS MASTER SERVICES - Laserfiche WebLink

Home Browse Search

SIEMENS 3. All outdoor equipment shall be weather proofed to protect devices, cabling and structures from the outdoor elements, 4. All risers and lateral connections Into the field enclosures, both Security and IT/Telecom enclosures shall be schedule 80 rigid steel construction. S. Conduit elbows may be schedule 80 PVC construction, assuming the connection to steel risers occurs within the concrete foundation. Any conduit elbows that are not embedded within a concrete foundation shall be schedule 80 and rigid steel construction. 6. All above ground conduit shall be galvanized rigid steel unless otherwise noted. 7. Conduit runs shall allow for 50% additional capacity. All conduits shall have a "pull string" installed and remain for future use. B. All work shall meet or exceed the latest requirements of all national, state, county and municipal codes. 9. All required permits and inspection certificates shall be provided by others. 10. All work shall conform to the National Electrical Code, National Fire Codes, NFPA Life Safety Code and other local codes. General Terms & Conditions: 11. Prior to any daily work being conducted, a safety tailboard meeting shall be conducted with all contractors and site personnel. This training will be re -conducted every time there are new personnel working on site. 12. All affiliates of the contractor shall dress in appropriate work attire bearing their respective company logo for recognition. When working at the Police Department all affiliates of the contractor shall report to CDC, for sign in and temporary badging for the day. They must also notify a Siemens and/or City's site representative every time they are to be on site. Failure to adhere to the rules set forth in this and subsequent CoSA Issued documents regarding security protocol shall be grounds for removal from the site. 13. The contractor shall be responsible for the cleanup at the site after each day of work. Failure to adhere to workplace neatness shall be remedied at Siemens's expense and subtracted from the overall cost of the project, 14. Work conducted at the site shall be coordinated in advance with the Siemens project manager and on the site personnel/representative. Schedule and designated working procedures will be adhered to unless otherwise agreed to by all parties in writing. 15. Existing Conditions: Prior to commencing work at site, verify the agreement of existing conditions with indicated conditions. Notify the Siemens Project Manager of discrepancies found. Start of work without notification constitutes acceptance of condition, without extra cause for costs. 16. Discrepancies: Should any discrepancy exist on drawings or in the specifications, or between the drawings and specifications, the contractor shall bring the discrepancy to the attention of the Siemens Project Manager for clarification. 17. Construct barricades, lights, or other guards about the work area shall be supplied if required by local ordinances or public safety and necessity, as related to this contract Page 12