FULL AGENDA PACKET_2021-03-16 - Laserfiche WebLink

Home Browse Search

may be required to provide routine operating inspection(s) to check system performance in accordance with aprogram ofstandard routines oedetermined by our experience, the equipment manufacturer's published re«nmmendabona, equipment application, and location. This sowino will focus on equipment operation, fluid levels, operating and safety controls, and safe equipment operation. Operabng/nmponton—HeatngasRequ|red The proposer may berequired to provide this service to assure mechanical equipment continues to operate effioienUy, safely and with minimal operating disruptions during the operating season. The City Representative will provide routine operating inspection(s) to check system performance in accordance with o program of standard routines as determined by our exporienca, the equipment manufacturer's published recommendations, equipment application, and location. This service will focus on equipment operation, fluid |eve|e, operating and safety oontro|n, and safe equipment operation. Operating Inspection — Cooling aeRequired This service may be required to assure mechanical equipment continues to operate efficien8y, safely and with have minimal operating disruptions during the operating season, Pmpoom *i|| provide routine operating inspection(s) to check oyoham performance in accordance with a program of standard routines as recommended by the equipment manufacturer's published reoommondaUona, equipment application, and location. This service will focus on equipment operation, fluid levels, operating and safety controls, and safe equipment operation. Equipment Tasking amRequired The following tasks may bmrequested onanas needed basis. These tasks are designed to maintain the equipment in on optimum operating condition so that the equipment will operate reliably and efficiently. Reciprocating Compressors: 1. Perform annual Speuho-Chemica|oil analysis test. 2. Preventive maintenance shall beperformed aarequired. 3. Lock -out and Tag -out equipment anrequired. 4. Check all electrical wiring and connections and tighten aarequired. 5. Check starter contactor surfaces for wear aorequired. G. Visually leak check compressor and associated refrigerant piping as required. 7. Clean exterior ofcompressor aarequired. 8. Check operation nfcrankcase heater asrequired. A. Meg -ohm motor from starter and record as required. 10. Check and calibrate all safety and cut-out devices eorequired. 11. Check and adjust compressor capacity controls aarequired. 12, Cheok, calibrate and adjust all operational controls as required. Exhaust Fans: Preventative Maintenance aarequired. Lock -out and Tag -out equipment as required. Check all electrical wiring and connections and tighten aorequired. Check all motor starter contactor surfaces for wear oorequired. Clean starter and electrical control enclosures ae required. Lubricate motor bearings and fan bearings asrequired. City Council ;&m6mpj27 3/16/2021 &oouy;