Laserfiche WebLink
2:27 <br /> <br />opDortunlty to check tt~e number of sacks of cement on each <br />batch beeore the sacks ~re openea. <br /> <br /> Ths mass shall be turned with shovels two (2) times <br />dry and two (2) times wet, not including shoveling into wheel- <br />barrows. The specified amount of water ~ha]l be supplied in <br />a sprmy during the wet turns. <br /> <br /> (d) R~,~I¥ING CONCR~TE. No concrete shall be used <br />which has partially s~t, and no concrete shall be retempered <br />or remixad. <br />SECTION v. <br /> <br /> All forms shall be smoc~th, ti~bt, true to the re- <br />qutrsd lines and elevations and secure]2 braced and tied to <br />prevent their ~ovement or deflection during the placing the <br />ramming of tvs co,crete. Forms shall be cleaned of a~] morta~ <br />dirt and shavings and shall be thoroughly wet i~medlately be- <br />fore the placing of t~e concrete. The time for removal of <br />forms shall be determined by the Superintendent of Streets. <br />During the setting of the concrete and before the removal of <br />the forms, no extraneous loads ahall be placed upon the con- <br />cress. In removing forms extreme care must be taken neither <br />to deface the structure nor to disturb the remalniug supports. <br />SE~CTION 8. wI~CTNC AN? FIN~SM!NO CONCRETE. <br /> <br /> After bein~ mi~ed, concrete shall be handled rapidly, <br />in as s.ha~l batches ss practicable, from the p~oce of mixing <br />to the place of fln~ deoosit and s~a]~ be derosited and maul- <br /> <br />pulated in a manner <br />ting and to prevent <br />insure the complete <br /> <br />that wi~] insure the most thorough compac- <br />voids or pockets. Care sba~] be taken to <br />co,ting of all parts of the reinforcement <br /> <br />with mortar. T~e concrete sh~l be spaded in a manner such <br />t~at t~s finer parts will be in con~aot with the faces of the <br />forms thereby leaving the surface of the structure smooth and <br />free from pockets. No co,crete sha~l be deposited from a <br />height, but must be lowered into position. When Joinlug new <br />concrete with concrete already set, the ~urface of~tbe old <br />concrete shall be cleaned, roughened, thoroughly wet aha then <br />coated with thin, neat cement mortar. Tbs surface of concrete <br />which is ~]lowed to set sba]~ be left rough so as to insure a <br />~oud bond. All c~ncrate sha~ be kept t~orou~hly wet for a <br />period of seven (V) days after being placed. In all p3nces <br />where water is encountered i~, placing concrete foundations or <br />other parts of ouy structure, the contractor must provide <br />s~it~le means t~ keep th~ work free from such water during <br />placing and for a period of twelve (1~)hours thereafter. <br /> <br /> After the forms haw been removed, all prominent <br />ridges and other irregularities on the surface of the concrete <br />shall be rubbed down with a carborundum block or removed with <br /> <br />s chisel. All '~ ~ ' <br /> sr~ect~rg tie wires shall be cut beneath the <br /> <br /> <br />