Item 18 - Traffic Signal Installation at Segerstrom Avenue and Rosewood Avenue

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO.: 25-6030 TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD AVENUE Written warranty must be provided by manufacturer for full replacement of the module due to any failure for a minimum period of fifteen (15) years. The LED signal module manufacturer shall provide a detailed written warranty issued by the factory of module origin with the following minimum provisions: Modules shall, at the manufacturer's option, be repaired or replaced if the module fails to function as intended due to workmanship or material defects within the first 15 years from the date of delivery. Modules shall, at the manufacturer's option, be repaired or replaced if the module exhibit luminous intensities less than the minimum specified values within the first 15 years of the date of delivery. 4.23 VEHICLE DETECTORS Detectors and detector lead-in cable shall conform to the provisions in Section 86- 1.0217(2)(c)(iii), "Inductive Loop Conductors" Section 86-1.02W, "Loop Detector Sealants," Section 87-1.03V, "Detectors," Section 87-1.03W, "Sealants," of Caltrans Standard Specifications and these Special Provisions. Loop wire shall be per City Std. Plan 1506. All loop connection shall be in series only. All new or modified loop curb terminations shall be Type A as shown in CSP ES-51). Curb termination conduit shall be 2" (53mm). If any inductive loop detector wires or loop detector lead-in cables are to be left un- terminated in a pull box for more than a 24-hour period, the ends shall be securely taped and sealed with an electrical insulating coating. 4.24 PEDESTRIAN PUSH BUTTON ASSEMBLIES Pedestrian push button assemblies shall conform to Section 86-1.02U and 87-1.03U, "Push Button Assemblies," of the Caltrans Standard Specifications and these special provisions. Unless shown otherwise on the plans, Pedestrian Push Button shall be Type B Pedestrian push button assembly shall be ADA compliant furnished with stainless steel tamper -proof screws. Pedestrian push button assembly shall consist of 5"x7" housing (Color: Green), 2" ADA Moving Push Button (Color: Green, Button: Silver Stainless Steel) and Caltrans standard 5" by 7.5" R62D sign. The Pedestrian Push Button Assembly shall be installed at ADA standard height of 42", measured from top of sidewalk to center of push button.