Item 18 - Traffic Signal Installation at Segerstrom Avenue and Rosewood Avenue

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO.: 25-6030 TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD AVENUE The aluminum mounting brackets shall be adjustable (MD Solutions Inc. Oscillating Mast Arm Bracket-Adj or equivalent). When installation of the sign to the mast arm is complete, the sign should swing freely 90 degrees in both directions when moved by the installer. 5. Finish: The finished sign shall be flat within a ratio of 0.40" (10 mm) per linear foot when measured across the plane of each panel from opposite corners or at any location on the panel. All finished signs shall have a smooth flat surface without defects or objectionable marks of any kind on either the front or the back faces. All letters and designs shall be clearly cut and sharply defined. The appearance of the sign face shall be uniform throughout and shall be free of wrinkles, gel, hard spots, streaks, extrusion marks, air bubbles or blemishes that may impair the serviceability, detract from the general appearance or color - matching of the sign when viewed from a distance of twenty-five (25) feet (7.5 m). The finished sign shall be clean and free from all burns, sharp edges, loose rivets and aluminum marks. Signs with any defects or damage that affect their appearance and serviceability will not be acceptable. All metal parts shall be fabricated in a uniform and quality workmanlike manner with all sign surfaces and edges free of defects. No repairs shall be made to the face sheet without the approval of the City inspectors. 4.31 REMOVING, REINSTALLING, OR SALVAGING ELECTRICAL EQUIPMENT Salvaging and stockpiling electrical equipment shall conform to the provisions in Section 15, "Existing Facilities," of the Caltrans Standard Specifications and these Special Provisions. When called for on the plan, salvaged equipment shall be delivered to the City of Santa Ana Public Works Agency Maintenance Yard, Santa Ana. The Contractor shall notify the City a minimum of two working days prior to delivery of salvaged equipment. Existing equipment removed and not to be reused or salvaged to the City of Santa Ana shall become the property of the Contractor and shall be removed from the site by the Contractor. The Contractor shall provide all labor, equipment, and materials necessary to remove, salvage, transport, and dispose of equipment not reused. All reused or relocated vehicle and pedestrian heads shall be painted to match new equipment color. 75