Item 18 - Traffic Signal Installation at Segerstrom Avenue and Rosewood Avenue

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO.: 25-6030 TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD AVENUE 6.02 IMPORT BACKFILL MATERIAL Imported backfill shall conform to the applicable provisions of Section 306-1.3.7 of the Standard Specifications and these Special Provisions Imported backfill shall be clean soil, free from organic material, trash, debris, rubbish, broken Portland cement concrete, bituminous materials, or other objectionable substances. The Contractor shall dispose unsuitable material to an approved facility. 6.03 EXISTING UTILITIES AND ADJUSTMENTS IN GRADE All existing utilities shall be protected in place, unless otherwise noted on the plans. The Contractor shall be responsible for any damage to existing utilities as a result of his operations. The location of existing utilities as shown on the plans was obtained from a search of available records. It shall be the Contractor's responsibility to notify the respective utility owners and Underground Service Alert (811) to determine the exact field location of all utilities shown or not shown on the plans, which may conflict with his operations. Potholing of existing utilities, points of connection and service connections to determine exact depth and field locations shall be the responsibility of the Contractor. The Contractor shall determine the location and depth of all utilities including service connections and points of connection, which may affect or be affected by its operation, three (3) weeks in advance. In the event of any conflicts the Engineer shall be immediately notified. City owned utility frames and covers for survey monuments, water meter, water valves, traffic signal and street light pull boxes, and manholes within the area to be paved or graded, shall be set to finish grade by Contractor after construction of new pavement. In Portland cement concrete pavement and sidewalk areas, City utility frames and covers shall be adjusted to grade prior to placement of concrete. Contractor shall supply new sewer manhole frame and covers, sewer cleanout frame and covers, concrete rings and water valve pot frame, canister and lids per City of Santa Ana Standard Plans. Prior to paving, an "I.D. Locator" shall be attached to each valve box or manhole cover. An "ID Locator" is a rubberized marker approximately 4" high that adheres to the utility cover and pops -up after paving for easy identification and location of the respective valve box or manhole. Contractor shall measure and tie -out locations of manholes and water valves prior to paving. 6.04 LANDSCAPING AND IRRIGATION REPAIR This section shall conform to Sections 212 and 308 of the Standard Specifications and these Special Provisions. FM