Laserfiche WebLink
CITY OF SANTA ANA <br /> SPECIFICATIONS <br /> PROJECT NO.: 25-6030 <br /> TRAFFIC SIGNAL INSTALLATION AT SEGERSTROM AVENUE AND ROSEWOOD <br /> AVENUE <br /> 2. Method of Labeling: <br /> a. In Pull Boxes: <br /> Labels shall be produced using tape designed for outdoor use. <br /> b. In Traffic Signal Cabinet: <br /> All conductors and cables in the cabinet shall be labeled, including individual <br /> traffic signal conductors from CSC. <br /> 4.29 PHOTOELECTRIC CONTROLS <br /> The Contractor shall furnish and install Twist-Lock Electronic photoelectric controls in <br /> service pedestal except where shown otherwise on the plan or as directed by the Traffic <br /> Engineer. Photoelectric controls shall be Ripley Lighting Controls LongLife II <br /> Photocontrol or approved equal. <br /> 4.30 OVERHEAD REFLECTIVE STREET NAME SIGNS <br /> All sign layouts shall be the contractor's responsibility and shall be in accordance to the <br /> City layout guideline. All signs shall be made in accordance with drawings furnished by <br /> the City and these Special Provisions. All sign layouts must be approved by the City prior <br /> to final production. <br /> A. GENERAL <br /> All items shall be new. The materials and workmanship shall be the best quality for <br /> the purpose. <br /> The contractor shall replace any sign delivered under this contract which does not <br /> conform to these specifications at no cost to the City. <br /> B. DETAILED REQUIREMENTS <br /> 1. Base Metal: <br /> The base metal substrate shall be new sheet aluminum alloy 3003-H14 or 5052- <br /> H32. <br /> The thickness of the aluminum shall be 0.05"(1 mm). The material shall be subject <br /> to inspection prior to degreasing and chromate conversion coating operations. <br /> Alloy and temper designations shall be verified in mill test certifications. <br /> All sign panel edges shall be shear-trimmed or roll-slit to produce neat edges and <br /> square corners. Sign panel edges shall be straight within 1/32" (1 mm) form the <br /> straight plane. Edge delaminating or incomplete coverage of the base metal <br /> 72 <br />